Siemens 2060isdn manual General, Dialing an external number using the keypad

8.12.98 I_KAP04.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Operation with supplementary devices

●Socket C (bottom), internal number 9: max. 9 600 baud

Outgoing calls

General

The procedures described below apply to a corded telephone connected to the base station. You can operate other supplementary devices such as a fax machine, videotex decoder or modem in the same way, provided they have a handset or a line seize key and a keypad for dialing.

You should press the keys in quick succession when you use the supplementary device so as to ensure that the connection to the dialer is not cleared.

The ºentry as stated in some procedures is not necessary in the case of telephones with pulse dialing.

Dialing an external number using the keypad

	A corded telephone connected to the base station is
	ready for use as soon as the base station itself is opera-
	tional.
c Lift the handset. The internal dial tone is audible.
0	Press this key to seize the trunk line (automatic line sei-
	zure must be switched off for this supplementary device,

➔ page 26).

Dial the external number. The user answers and you con-

oduct your external call.

The busy tone is audible if the ISDN line is in use by another internal user. You cannot selectively seize a multiple subscriber number if one is en- tered.

Dialing an internal number to reach a mobile unit or other supplementary device

c

9

0...9

or

c 6

Lift the handset.

Press this key.

Enter the user’s internal number.

Lift the handset and press 6 if you want to call all inter- nal users at once.

The first internal user to answer takes the call.

If 2 external calls are in progress at the same time, it is not possible to set up a connection from or to user 0.

69