Siemens 2060isdn manual Delete all lock numbers, Blocking unwanted calls, Lock int2 Lock on

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Locks

tLock int2

tLock on

tLock No. list

tNew entry

tDelete lock No.

Select the internal user (for example “Lock int2”) to whom the function will apply.

This is the menu for defining lock numbers. The options at your disposal are as follows:

Activate/deactivate call barring by lock numbers.

When you select “Lock on”, the message “call barr. Nos. for int2 activated” is displayed briefly.

Check/change lock numbers.

Once you have selected a lock number you can check or change it.

Add a new lock number.

Delete individual lock numbers. Select an entry: the lock number you select is deleted when you confirm your choice.

Delete all lock numbers

Use this function to delete all lock numbers at once.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

.t

Servicet

tMeaning: see footnote

System settings t Call barring t Delete all

All lock numbers for all internal users are deleted at once. The “Entries deleted” messages appears for 2 seconds by way of confirmation.

Blocking unwanted calls

You can enter up to three phone numbers, each up to 16 digits long, to determine which users can reach you. Calls from users with phone numbers other than these num- bers are not put through to you.

A message indicating that this lock is activated appears on the mobile-unit display.

This lock can be circumvented if the calling party has sup- pressed transmission of the phone number to you (Glos- sary, ➔ page 98), or if the call is from a non-ISDN user.

It is advisable to activate phone number display as a better way of checking the origin of incoming calls.

50tmeans: browse with u

Z or u NEXT

and press x

OK to confirm