Siemens 2060isdn manual System settings Reinitializing the base station, Reset Deleted Not changed

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

System settings

Reinitializing the base station

You can reinitialize the base station - restore default set- tings, in other words - for example if you are no longer sure precisely which changes have been made. For the sake of simplicity, however, not all system parameters are reset when you reinitialize. The effects are as follows:

Reset	Deleted	Not changed
Settings	Units/charges accrued	System code
Configuration	Emergency phone numbers	Mobile unit registrations
	Lock numbers for call barring	Ring allocation
	Point-to multipoint/point num-
	bers

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

.t

Servicet

tMeaning: see footnote

System settings t Initialization

The message “Initialisation completed” is displayed for 2 seconds when you confirm your choice.

Ring allocation for point-to-multipoint access

By setting ring allocation you determine:

1.The mobile units and devices and their multiple sub- scriber number (external phone number) at which an external call will be signaled.

2.The multiple subscriber number (external phone num- ber) under which you conduct an outgoing external call (important for call data recording and phone num- ber display).

Ring allocation enables you to assign one or more internal numbers to a multiple subscriber number. Conversely, one or more multiple subscriber numbers can be as- signed to an internal number.

If you have assigned multiple external phone numbers to an internal user (for example for receiving business calls and private calls), the first external phone number in the list is the one used by call data recording for outgoing calls.

You define ring allocation by entering the internal number in the list of the collective call group or the group lists for extended ring no answer.

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 55