Siemens 2060isdn manual Important information about Euro-ISDN, Connection options base station

8.12.98 I_KAP01.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Installation

Connection options: base station

The default operating mode is “point-to-multipoint access”.The procedure for changing the op- erating mode to “point-to-point” is described on ➔ page 24.

Important information about Euro-ISDN

Your ISDN system Gigaset 2060isdn supports two types of access.

Types of connection

●Point-to-multipoint

You can connect and operate one or more devices if you have an access of this type. You can connect other ISDN devices along with your Gigaset 2060isdn, for example an ISDN- compatible fax machine or a PC with ISDN card. If you operate a multicell system (➔ page 84) you can connect up to 6 Gigaset 2060isdn base stations to a point-to-multipoint access. You can use a maximum of 10 multiple subscriber numbers on a point-to-multipoint access. All users assigned an MSN are called via this number. You can also assign all users to one MSN. The MSNs are individually programmable:

Example: MSN 1 = office MSN 2 = private MSN 3 = fax

●Point-to-point

The Gigaset 2060isdn has to be the only communication system connecting to a point-to- point access.

Users can be reached selectively by dialing the internal numbers as extension suffixes. Col- lective calls and group calls are not supported.

This is a particularly economical operating mode if the number of users connected to your Gigaset 2060isdn is large (e.g. 8 mobile units, 1 corded telephone, 1 fax machine).

17