Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662
3Registering and charging the handset
The display is protected by a plastic film. Remove the protective plastic film from the display.
Menu
Insert the batteries
To register your handset, place it in the base station with the display facing upward. After approx. one minute, the handset’s internal number is displayed (e.g.: INT1). Successful registration is signalled by a confirmation tone.
When the handset is registered the display will show:
INT 1
Menu
Insert the two batteries supplied, as indicated on the label inside the battery compartment and slide the battery compartment cover shut.
The battery cover may be found in the packaging with the batteries.
WARNING
Under no circumstances should
If the icons on the display
flash continuously...
It means that the handset is not registered with the base station.
Ensure you have correctly carried out step 3 above. If the product has still not registered, please see “Registering manually” on page 56.
All additional handsets you purchase will need to be individually registered with the base station before they will work with the Diverse 4010 Executive.
Leave the handset for approx. 16 hours in the base station to charge the batteries, as they are not charged in the factory. The charging status icon flashes on the handset to indicate that the batteries are being charged.
SETTING UP
11