Cisco Systems 7941G-GE, 7961G-GE warranty Change the ring pattern Select a device Per line

Your phone uses the ASCII Label field if the phone does not support double-byte character sets.

		Customizing Your Phone on the Web
If you want to...	Then do this after you log in...
Change the ring pattern	1.	Select a device.
per line	2.	Click Line Settings.
	3.	If you have more than one directory number (line) assigned to your
		phone, verify that the appropriate line is selected or choose a new one.
	4.	In the Ring Settings area, choose a setting to tell your phone how to
		indicate an incoming call on the selected line.
	5.	Click Save.
	Note The “idle” ring setting pertains if you receive an incoming call when the
		phone is idle. The “consecutive” ring setting pertains if you receive an
		incoming call when the phone is active.
Change or create a line	1.	Select a device.
text label that appears	2.	Click Line Settings.
on your phone screen
	3.	If you have more than one directory number (line) assigned to your
		phone, verify that the appropriate line is selected or choose a new one.
	4.	In the Line Text Label area, enter a text label.
	5.	Click Save.

Note

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.0 (SIP) 59