Phonetics 1104 user manual Special Dialing to a Beeper or Pager

Sensaphone® Model 1104 User’s Manual

4.4.4 Special Dialing to a Beeper or Pager

The following example demonstrates just one solution to programming the Model 1104 for dialing to a beeper or pager. Many other key sequences will also work. Start with steps 1–3 below; next, enter special dialing keys where required for your beeper or pager service.

To incorporate a pound or asterisk:

1.Press SET.

SET

#

2.	Press PHONE NUMBER.
	PHONE
	NUMBER
3.	Press any unassigned number key (from 1 to 4) to represent
	the new telephone number entry.

1

CALL

DELAY

4

MAX CALLS

2

VOICE

REPS

3

INTERCALL

TIME

4.Enter the complete telephone number using the number keys. The Model 1104 will recite the digits as they are pressed.

1

CALL

DELAY

4

MAX CALLS

7

RECOGNITION

TIME

2

VOICE

REPS

5

TEMP LIMITS

8

CLOCK

0

ID NUMBER

POWER

3

INTERCALL

TIME

6

CALIBRATE

9

LISTEN TIME

SOUND

5.Press CODE. This instructs the Model 1104 to wait for the telephone call to be answered by the beeper or pager service. (A voice message will not occur—only digital tones are used.) Note that CODE may not work with beepers where there is no ring before the beeper connects. If that proves to be the case for your particular beeper, skip the CODE step and proceed from Step 4 to Step 6.

CODE

MUTE

42