Topcom Axiss 800
7Getting started
7.1 Making a phone call
To make a phone call, pick up the receiver or press the Handsfree button 
. Enter the telephone number.
Note: The call duration timer is shown on the display [mm:ss].
7.2 Last number redial
The Axiss saves the last dialled telephone numbers in the redial memory.
1.Pick up the receiver or press the handsfree button 
.
2.Press 
, the number will be dialled automatically.
Note: The Redial button 
can also be used as a Pause button while entering a telephone number ! The letter ‘P’ appears on the display on the location where you have added a pause of 3 sec.
7.3 Mute
It is possible to mute the microphone during a conversation by pressing and holding the mute button 
. You can now talk freely without the caller hearing you. Release the Mute button 
if you want to resume your conversation.
7.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch at the back of the phone (Hi- 
, Lo- 
). (13)
7.5 Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your telephone company); or to transfer phone calls when you are using a telephone exchange (PABX).
The flashtime can be selected by the switch (12) on the back of the phone (100/300 ms).
Before changing the flashtime switch, the line cord must be disconnected.
6 | Topcom Axiss 800 |