Topcom E450 manual Pause key, Locating a handset Paging function, Redial memory

Using the telephone

3.12Pause key

When dialing a number you can add a pause between two digits: 1 Press the redial/pause key for 2 seconds.

3.13Locating a handset (Paging function)

4GHI 5JKL 6MNO

1Press the paging key on the base.

All handsets registered with the base will ring.

2Press any key on the handset to stop the ringing.

3.14Redial memory

You can redial up to 10 of the last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead.

1 Press the redial key.

2 Select a number. If the number is in the phonebook, the name will be shown.

When the name is displayed, you can toggle between the name and the number by pressing the OK key!

3 Press the off-hook key to start the call.

4 Press the on-hook key to return to standby.

3.15Using the alphanumerical keypad

With your telephone, you can also enter alphanumeric characters. This is useful for entering a name into the phonebook, giving a name to the handset, ...

To select a letter, press the corresponding key as many times as necessary.

For example, to select an ‘A’, press ‘2’ once. To select a ‘B’, press ‘2’ twice and so on.

To select ‘A’ and then ‘B’ consecutively, press ‘2’ once, wait until the cursor moves on to the next character, then press ‘2’ twice.

During entering text, the available character under each key appears below on the display.

Press ‘1’ to select a space.

Press the delete key to delete a character.

The keypad characters are as follows:

Key	First	Second	Third	Fourth	Fifth
	press	press	press	press	press
1	space	-	1
2	A	B	C	2
3	D	E	F	3
4	G	H	I	4
5	J	K	L	5
6	M	N	O	6
7	P	Q	R	S	7
8	T	U	V	8
9	W	X	Y	Z	9

10