Topcom E450 manual Personalize the handset, Adjusting the ring volume, Choosing the ring melody

Personalize the handset

6 Personalize the handset

Every programmation is confirmed at the end by a double or single long beep. A double beep confirms the validation of your choice. A long beep signifies that the modification has not been taken into account.

6.1Adjusting the ring volume

Handset ring volume internal/external calls

The handset ring volume for internal or external calls can be set separately. You can choose from 5 handset ringer volume levels and “OFF”.

When the handset is inside the base, the base will not ring during incoming call. So when the handset ring volume is turned off and handset is inside the base, your phone will not ring anymore!

1 Enter the menu.

2 Select “HANDSET” and confirm.

3 Select “INT RING VOL” to change the internal volume or “EXT RING VOL” to change the external volume and confirm.

4 Select a volume (1 to 5 or “OFF”).

5 Confirm or return to the previous menu.

6.2Choosing the ring melody

The base and each handset can ring with a different melody. The handsets can ring with a different melody according to whether the call is internal or external. You can choose from 5 different ringer melodies:

1 Enter the menu.

2 Select “SETUP” and confirm.

3 Select “HANDSET” and confirm.

4 Select “INT MELODY” to change the internal melody or “EXT MELODY” to change the internal melody and confirm.

5 Select a melody (1 to 5).

6 Press the OK key to confirm or return to the previous menu.

6.3Activation/deactivation of beeps

The handsets can emit a beep tone when a key is pressed, when the batteries are low or when the handset is out of range.

Key pressed beep tone on/off

1 Enter the menu.

2 Select “HANDSET” and confirm.

3 Select “BEEP” and confirm.

4 Select “KEYTONE” and confirm.

5 Select “ON” to activate or “OFF” to deactivate and confirm.

English

13