Topcom E450 Handset name, Automatic answer, Reset the handset, Low battery, Handset out of range

Personalize the handset

Low battery

1 Enter the menu.

2 Select “HANDSET” and confirm.

3 Select “BEEP” and confirm.

4 Select “LOW BATTERY” and confirm.

5 Select “ON” to activate or “OFF” to deactivate and confirm.

Handset out of range

1 Enter the menu.

2 Select “HANDSET” and confirm.

3 Select “BEEP” and confirm.

4 Select “OUT RANGE” and confirm.

5 Select “ON” to activate or “OFF” to deactivate and confirm.

6.4Handset name

You can change the name displayed on the handset during standby (max. 9 characters). This function allows you to personalize each handset.

4GHI 5JKL 6MNO

1Enter the menu.

2Select “HANDSET” and confirm.

3Select “NAME” and confirm.

4Enter the name you want and confirm.

Press the delete key to delete a character. Press and hold the phonebook key to exit the menu without taking any modifications into account.

6.5Automatic answer

When there is a incoming call and the handset is on the base, the phone automatically takes the line when lifted. This is the default setting, but can be set off:

1 Enter the menu.

2 Select “HANDSET” and confirm.

3 Select “AUTO ANSWER” and confirm.

4 Select “ON” to activate or “OFF” to deactivate and confirm.

6.6Reset the handset

It is possible to return the phone to the original default configuration. This is the configuration which was installed when you first received the telephone.

To return to default settings:

4GHI 5JKL 6MNO

1Enter the menu

2Select “SETUP” and confirm.

3Select “DEFAULT” and confirm.

4Enter the 4 digit PIN code (default =0000) and confirm.

14