ENGLISH
5.12 SETTING THE KEY BEEPS
•Press and hold the programming button 
until these 3 icons appears on the display 
R
•Press ‘2’. Only 
appears on the display
•Press ‘1’ to turn the key beeps OFF, or press ‘2’ to turn it ON
•Press 
again to confirm the setting
5.13 KEY LOCK
When the keypad is locked, pressing any key will have no effect during standby (except holding the 
). When there is an incoming call, you can still answer the call by pressing the Line button 
. During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again.
•Press and hold the 
key
•
appears on the display and the keypad is locked
•Press and hold the 
key again to
5.14 DEFAULT SETTINGS
By doing a reset, all settings will be as a newly manufactured unit:
-Flash time = 100ms
-Ring melody = 1
-Ring volume = 3
-Receiver volume = medium
-Key beep ON
Also all numbers in the call list, phonebook and redial memory will be erased:
•Press the and hold the programming button 
until these 3 icons appears on the display 
R
•Press and hold the Ø key until you hear the confirmation tone
•The handset is reset
6. CALLER-ID FUNCTION (CLIP)
The Butler 3100 displays the telephone numbers of incoming calls. This function is only possible if you are subscribed to a telephone operator that provides this service. Contact your telephone provider for more information. When you receive a call, the numbers are saved in a Call list. This list can hold 20 telephone numbers (each of max. 20 digits). If
the number is longer then 14 digits, you can press the 
key to show the other 6 digits!
6.1 NEW CALLS
When you’ve received a new unanswered call, the CLIP symbol 
appears on the display.
6.2 CONSULTING THE CALL LIST
When you consult the Call list, you will notice that the list always starts with the last call received.
•Press the Call Log button 
. The last received call is shown on the display.
•Use the Up 
and Down 
buttons to scroll through the list. The Up key 
will skip backwards to the previous record, the Down key 
will skip forward to the next record.
•You can leave the Call list by pressing the 
or ‘C’ button.
6.3 CALLING A NUMBER FROM THE CALL LIST
•Scroll through the Call list until the desired number is shown on the display.
•Press the Line button 
. The number will be dialled automatically.
6.4 ERASING A NUMBER FROM THE CALL LIST
•Scroll through the Call list until the desired number is shown on the display.
•Press and hold the delete button Ø to erase the number.
Topcom Butler 3100 | 9 |