Sharp ZQ-640, ZQ-630, Z&650 operation manual Setting the Clock

Enter your name, then press [y] or [NEXT].

The cursor moves to the NO. field.

Enter your number an example, tel number, mobile phone number, etc. Then press [v] or [NEXTJ. The cursor moves to the ADDRESS field.

Enter your full address.

Press [+I] to move the start of the next line in ADDRESS.

Press [ENTER] when done.

Press [ENTER] to proceed with settina uo the Clock as described below (or [CANCEL] to quit the User Setup procedure).

Setting the Clock

In order for the Calendar, Schedule, To Do, and other time- based applications to work correctly, the built-in clock must be set to the correct time, date and city. The Clock application displays the time in two different cities: the Local city, where the user normally lives or works, and the World city, which is any other city of the user’s choice. When the Organizer is first initialized, the Local city is automatically set to New York, and the World city is London. Before setting the Clocks correct time, you should first select the Local City for which you want to set the time.

After entering the Owner Information above, the following list of cities appears:

If the desired city does not appear, press [PR EVj or [NEXTI to display more cities.

You can jump to a particular country by pressing the first letter of that country’s name.

Select the desired city by moving the cursor to it and then press [ENTER] to confirm. Or select numbers [l] - [4] directly.

The Daylight Saving Time screen appears.

3.If your city is currently on Daylight Saving Time, press [VI, otherwise press [N].

The ADJUST TIME/DATE window then appears.

4.Select the time system you want the Clock to use by pressing [+] or [,I, then press [V] or [NEXT].

5.In the LOCAL DATE field, press [y ] to display the pop- up calendar. Use [PREV] and [NEXT] to select the current month, then use the arrow keys to select today’s date.

10