Avaya 4621SW IP manual Federal Communications Commission Statement Part

Page 3

Copyright 2005, Avaya Inc.

All Rights Reserved

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing. However, information is subject to change.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language as well as information regarding support for this product, while under warranty, is available through the following Web site: http://www.avaya.com/support.

Preventing Toll Fraud

“Toll fraud” is the unauthorized use of your telecommunications system by an unauthorized party (for example, a person who is not a corporate employee, agent, subcontractor, or is not working on your company's behalf). Be aware that there may be a risk of toll fraud associated with your system and that, if toll fraud occurs, it can result in substantial additional charges for your telecommunications services.

Avaya Fraud Intervention

If you suspect that you are being victimized by toll fraud and you need technical assistance or support, in the United States and Canada, call the Technical Service Center's Toll Fraud Intervention Hotline at 1-800-643-2353.

Disclaimer

Avaya is not responsible for any modifications, additions or deletions to the original published version of this documentation unless such modifications, additions or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User.

How to Get Help

For additional support telephone numbers, go to the Avaya support Web site: http://www.avaya.com/support. If you are:

Within the United States, click the Escalation Contacts link that is located under the Support Tools heading. Then click the appropriate link for the type of support that you need.

Outside the United States, click the Escalation Contacts link that is located under the Support Tools heading. Then click the International Services link that includes telephone numbers for the international Centers of Excellence.

Providing Telecommunications Security

Telecommunications security (of voice, data, and/or video communications) is the prevention of any type of intrusion to (that is, either unauthorized or malicious access to or use of) your company's telecommunications equipment by some party.

Your company's “telecommunications equipment” includes both this Avaya product and any other voice/data/video equipment that could be accessed via this Avaya product (that is, “networked equipment”).

An “outside party” is anyone who is not a corporate employee, agent, subcontractor, or is not working on your company's behalf. Whereas, a “malicious party” is anyone (including someone who may be otherwise authorized) who accesses your telecommunications equipment with either malicious or mischievous intent.

Such intrusions may be either to/through synchronous (time-multiplexed and/or circuit-based) or asynchronous (character-, message-, or packet-based) equipment or interfaces for reasons of:

Utilization (of capabilities special to the accessed equipment)

Theft (such as, of intellectual property, financial assets, or toll facility access)

Eavesdropping (privacy invasions to humans)

Mischief (troubling, but apparently innocuous, tampering)

Harm (such as harmful tampering, data loss or alteration, regardless of motive or intent)

Be aware that there may be a risk of unauthorized intrusions associated with your system and/or its networked equipment. Also realize that, if such an intrusion should occur, it could result in a variety of losses to your company (including but not limited to, human/data privacy, intellectual property, material assets, financial resources, labor costs, and/or legal costs).

Responsibility for Your Company’s Telecommunications Security

The final responsibility for securing both this system and its networked equipment rests with you - Avaya’s customer system administrator, your telecommunications peers, and your managers. Base the fulfillment of your responsibility on acquired knowledge and resources from a variety of sources including but not limited to:

Installation documents

System administration documents

Security documents

Hardware-/software-based security tools

Shared information between you and your peers

Telecommunications security experts

To prevent intrusions to your telecommunications equipment, you and your peers should carefully program and configure:

Your Avaya-provided telecommunications systems and their interfaces

Your Avaya-provided software applications, as well as their underlying hardware/software platforms and interfaces

Any other equipment networked to your Avaya products

TCP/IP Facilities

Customers may experience differences in product performance, reliability and security depending upon network configurations/design and topologies, even when the product performs as warranted.

Standards Compliance

Avaya Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Avaya Inc. The correction of interference caused by such unauthorized modifications, substitution or attachment will be the responsibility of the user. Pursuant to Part 15 of the Federal Communications Commission (FCC) Rules, the user is cautioned that changes or modifications not expressly approved by Avaya Inc. could void the user’s authority to operate this equipment.

Product Safety Standards

This product complies with and conforms to the following international Product Safety standards as applicable:

Safety of Information Technology Equipment, IEC 60950, 3rd Edition, or IEC 60950-1, 1st Edition, including all relevant national deviations as listed in Compliance with IEC for Electrical Equipment (IECEE) CB-96A.

Safety of Information Technology Equipment, CAN/CSA-C22.2 No. 60950-00 / UL 60950, 3rd Edition, or CAN/CSA-C22.2 No. 60950-1-03 / UL 60950-1.

Safety Requirements for Information Technology Equipment, AS/NZS 60950:2000.

One or more of the following Mexican national standards, as applicable: NOM 001 SCFI 1993, NOM SCFI 016 1993, NOM 019 SCFI 1998

Electromagnetic Compatibility (EMC) Standards

This product complies with and conforms to the following international EMC standards and all relevant national deviations:

Limits and Methods of Measurement of Radio Interference of Information Technology Equipment, CISPR 22:1997, EN55022:1998, and AS/NZS 3548.

Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement, CISPR 24:1997 and EN55024:1998, including:

Electrostatic Discharge (ESD) IEC 61000-4-2

Radiated Immunity IEC 61000-4-3

Electrical Fast Transient IEC 61000-4-4

Lightning Effects IEC 61000-4-5

Conducted Immunity IEC 61000-4-6

Federal Communications Commission Statement

Part 15:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Image 3
Contents 4620/4620SW/4621SW IP Telephone Page Federal Communications Commission Statement Part Means of Connection About This Guide Using the Speed Dial Application Using the Web Access Application Index Intended Audience Issue DateAbout This Guide OverviewWhat’s New in This Document How to Use This DocumentConventions Used Document OrganizationConference Symbolic ConventionsRelated Documentation Typographic ConventionsIntroduction Introducing Your 4620/4620SW/4621SW IP Telephone4620/4620SW/4621SW IP Telephone 4620/4620SW/4621SW IP Telephone Number Name Description As Call a number, Cancel the current activity, Save enteredIndicator Speaker Indicator4620/4620SW/4621SW IP Telephone Navigating Application Screens About the Feature Key Expansion Unit EU24/EU24BLFeature is on/active White 4620/4620SW/4621SW IP Telephone Applications Phone ApplicationSpeed Dial Application Web Access Application Optional Call Log Application4620/4620SW/4621SW Telephone Options Push Feature Automatic Backup/Retrieval FeatureAdditional 4620/4620SW/4621SW Functionality Using Your 4620/4620SW/4621SW IP Telephone Call AppearancesMaking Calls Automatic Dialing Manual DialingLast number dialed is automatically redialed Redialing using a list of the last six numbers calledIf all lines are in use, automatic dialing will not work Redialing the last number calledNumber of the selected person dials automatically Dialing a party using a Speed Dial buttonAssociated Call Detail screen displays Selected Call Log displaysReceiving Calls Call Handling FeaturesConference HoldIcon on the current line changes to the Soft Hold icon Mute SpeakerCall is now active Changing from the Speaker to the handset or headset TransferLogging Off the Phone Retrieving a Voice Mail MessageReinstating the Phone After a Logoff Forcing a Login to the PhonePage Using the Speed Dial Application Entering Characters Using the DialpadEntering Data on Speed Dial Screens Editing During or After Entry Name Entry Example Adding a Speed Dial Button Prompt Select entry to edit displays Updating Speed Dial Button Label InformationPrompt Select label to delete displays Deleting a Speed Dial Button LabelIf you want to ThenNo deletion occurs. The Speed Dial Main screen displays Page About the Call Log Using the Call Log ApplicationMissed Calls Main screen displays Viewing a Call LogOutgoing Calls Main screen displays Answered Calls Main screen displaysAdding a Call Log Entry to a Speed Dial Button No deletion occurs and the Call Log’s Main screen displays Deleting Call Log EntriesDeleting a Single Call Log Entry Selected entry’s Detail screen displaysEntries are removed. The Call Log’s Main screen displays Disabling the Call LogDeleting All Entries from a Call Log Prompt Press Delete again to confirm displaysPage Using the Web Access Application Web Access Authentication Navigating Web PagesPrevious application or options screen displays Home page displays Navigating the Home Page and Other Standard-Size Web PagesAny characters entered are removed Entering Text on Web PagesEntering Text on Web Pages Adding a Speed Dial Button for a Web Site Telephone Number 4620/4620SW/4621SW IP Telephone Options First of two Options Main screens displays Accessing the Options Main MenusSetting the Redial Option This is the default settingApplication Options Setting the Phone Screen on Calling? Option Setting the Phone Screen on Answer? OptionSetting the Display Call Timers? Option Setting the Message Display RateDefault rate is Slow Setting the Call Appearance Width Setting Visual AlertingEnabling/Disabling the Call Log First Options Main screen displays Personal Ringing OptionsView Status Main Screen displays Viewing Quality of Service QoS StatusStatus Screen Viewing Options Viewing IP Address StatusChanging the Display Contrast Viewing Interface StatusViewing Miscellaneous Status If administered, the Audio Status screen displays Viewing the Network Audio QualityLogging Off the 4620/4620SW/4621SW IP Telephone Backup/Restore Options Display prompts for entry of your passwordReinstating the Phone After a Log Off Settings Saved During a Backup Setting changes from Disabled to Enabled Setting the Automatic Backup OptionVerifying Backup/Retrieval Status Retrieving and Restoring Data from a Backup File FTP Settings Main screen displays Select User Name Select Directory PathFeature Button Labeling Then Select Relabel feature buttons Select View default labelsSelect Restore default labels Feature Button Labeling screen re-displays Changing a Phone/PC Ethernet InterfaceSecond Options Main screen redisplays Selecting an Alternate Language Select either Yes softkey Headsets and Handsets Headsets for 4600 Series IP TelephonesHeadset Connector Type Ordering Code Handsets for 4600 Series IP Telephones Handset Connector Type Ordering CodeInterpreting Ringer Tones Telephone Management TroubleshootingFeedback Handset Tones Meaning Ringing Incoming Tones MeaningIcon Meaning Interpreting Display IconsProblem/Symptom Suggested Solution Testing Your PhoneBasic Troubleshooting Chart Testing the Telephone’s Lights and DisplayBasic Troubleshooting Chart Contact your System Administrator Problem/Symptom Suggested Resolution Troubleshooting 4620/4620SW/4621SW ApplicationsCall LOG Application Resetting Your Phone Resetting and Power Cycling the IP TelephonePower Cycling the Phone Numerical Index90 4620/4620SW/4621SW IP Telephone Release 2.2 User Guide Right/Left buttons Paging indicator Password 92 4620/4620SW/4621SW IP Telephone Release 2.2 User Guide
Related manuals
Manual 6 pages 35.08 Kb