Avaya 555-233-781 Changing a Phone/PC Ethernet Interface, Second Options Main screen redisplays

Page 70

4620/4620SW/4621SW IP Telephone Options

6.To re-label a Feature button, use the dialpad and any applicable Line/Feature buttons, to enter the new label (13 or fewer characters). To restore the default label to the selected Feature button, select Clear to remove the label you previously defined. (See Entering Characters Using the Dialpad and Editing During or After Entry in Chapter 3: Using the Speed Dial Application for information about data entry.)

7.Select Save to save the new/modified label (or to restore the default label as applicable). Alternately, select Cancel to exit the screen without saving a change or restoring the default label.

The Feature Button Labeling screen re-displays.

Note:

Some Feature buttons might be provided as part of your telephone software. In the event of a software upgrade, such standard Feature button labels might be overwritten with a new, standard label, erasing any re-labeling you may have performed.

Changing a Phone/PC Ethernet Interface

The 4620SW/4621SW IP Telephone ordinarily communicates with any optionally-attached PC in auto-negotiation mode. This basically means the PC and telephone together decide how to communicate when they are connected. Although unlikely, there might be an occasion where you or your System Administrator want to force this communication to a particular setting.

1.Select PC Ethernet interface from the second Options Main screen. The PC Ethernet Interface screen displays showing the current setting.

2.Press the Line/Feature button on either side of the desired setting. The Current setting changes to your selected setting.

3.To save your selection, select Save. To restore the original setting without changing it, select Cancel.

The second Options Main screen redisplays.

70 4620/4620SW/4621SW IP Telephone User Guide

Image 70

Contents 4620/4620SW/4621SW IP Telephone User Guide Avaya Inc All Rights Reserved About This Guide Using the Speed Dial Application Using the Web Access Application Index Overview Issue DateAbout This Guide Intended AudienceWhat’s New in This Document How to Use This DocumentDocument Organization Conventions Used Symbolic ConventionsRelated Documentation Typographic Conventions10 4620/4620SW/4621SW IP Telephone User Guide Introducing Your 4620/4620SW/4621SW IP Telephone Introduction4620/4620SW/4621SW IP Telephone 4620/4620SW/4621SW IP Telephone Lamp IndicatorName Description ButtonsHold Red button used to place a call on hold PadAbout the Feature Key Expansion Unit EU24/EU24BL Navigating Application ScreensFeature is on/active White Phone Application 4620/4620SW/4621SW IP Telephone ApplicationsSpeed Dial Application Call Log Application Web Access Application Optional4620/4620SW/4621SW Telephone Options Automatic Backup/Retrieval Feature Push FeatureAdditional 4620/4620SW/4621SW Functionality Call Appearances Using Your 4620/4620SW/4621SW IP TelephoneMaking Calls Automatic Dialing Manual DialingIf all lines are in use, automatic dialing will not work Last number dialed is automatically redialed Redialing using a list of the last six numbers calledRedialing the last number called Call Log entry is created for this callPress the Page Right or Page Left Number of the selected person dials automaticallySelected Call Log displays Calling a party from the Web Access application Associated Call Detail screen displaysReceiving Calls Call Handling FeaturesConference Icon on the current line changes to the Soft Hold icon HoldMute Call is now activeSpeaker Changing from the Speaker to the handset or headsetTransfer Turning the Speaker off during a callLogging Off the Phone Retrieving a Voice Mail MessageLogging Password entry Page Entering Characters Using the Dialpad Using the Speed Dial ApplicationEntering Data on Speed Dial Screens Editing During or After Entry Name Entry Example Adding a Speed Dial Button Updating Speed Dial Button Label Information Prompt Select entry to edit displaysIf you want to Deleting a Speed Dial Button LabelPrompt Select label to delete displays ThenUsing the Call Log Application About the Call LogViewing a Call Log If you want to ThenAdding a Call Log Entry to a Speed Dial Button Selected entry’s Detail screen displays Deleting Call Log EntriesDeleting a Single Call Log Entry No deletion occurs and the Call Log’s Main screen displaysPrompt Press Delete again to confirm displays Disabling the Call LogDeleting All Entries from a Call Log Entries are removed. The Call Log’s Main screen displaysPage Using the Web Access Application Navigating Web Pages Web Access AuthenticationPrevious application or options screen displays Navigating the Home Page and Other Standard-Size Web Pages Home page displaysEntering Text on Web Pages Any characters entered are removedEntering Text on Web Pages Adding a Speed Dial Button for a Web Site Telephone Number 4620/4620SW/4621SW IP Telephone Options Accessing the Options Main Menus First of two Options Main screens displaysApplication Options Setting the Redial OptionThis is the default setting Phone/ExitSetting the Phone Screen on Answer? Option Setting the Phone Screen on Calling? OptionSetting the Message Display Rate Setting the Display Call Timers? OptionDefault rate is Slow Setting Visual Alerting Setting the Call Appearance WidthEnabling/Disabling the Call Log Personal Ringing Options First Options Main screen displaysViewing IP Address Status Viewing Quality of Service QoS StatusStatus Screen Viewing Options View Status Main Screen displaysViewing Interface Status Changing the Display ContrastViewing Miscellaneous Status Viewing the Network Audio Quality If administered, the Audio Status screen displaysLogging Off the 4620/4620SW/4621SW IP Telephone Display prompts for entry of your password Backup/Restore OptionsReinstating the Phone After a Log Off Settings Saved During a Backup Setting the Automatic Backup Option Setting changes from Disabled to EnabledVerifying Backup/Retrieval Status Retrieving and Restoring Data from a Backup File FTP Settings Main screen displays Select Directory Path Select User NameFeature Button Labeling Select View default labels Then Select Relabel feature buttonsFeature Button Relabeling screen displays. Proceed to Step Select Restore default labelsChanging a Phone/PC Ethernet Interface Feature Button Labeling screen re-displaysSecond Options Main screen redisplays Selecting an Alternate Language Select either Yes softkey Headsets and Handsets Headsets for 4600 Series IP TelephonesHandset Connector Type Ordering Code Handsets for 4600 Series IP TelephonesTelephone Management Troubleshooting Interpreting Ringer TonesRinging Incoming Tones Meaning Feedback Handset Tones MeaningInterpreting Display Icons Testing Your PhoneTesting the Telephones Lights and Display Icon MeaningBasic Troubleshooting Chart Problem/Symptom Suggested SolutionTroubleshooting 4620/4620SW/4621SW Applications Problem/Symptom Suggested ResolutionReview the previous section, Basic Troubleshooting Chart Speed Dial ApplicationResetting and Power Cycling the IP Telephone Resetting Your PhonePower Cycling the Phone Index Numerical84 4620/4620SW/4621SW IP Telephone User Guide Password, setting Personal Ringing 86 4620/4620SW/4621SW IP Telephone User Guide