Cisco Systems OL-19025-01 manual Network Setup Menu, Option Description To Change, Select

Page 62

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Setup Menu

Network Setup Menu

The Network Setup menu provides options for viewing and making a variety of network settings. Table 4-1describes these options and, where applicable, explains how to change them.

For information about how to access the Network Setup menu, see the “Displaying a Configuration Menu” section on page 4-2.

For information about the keys you can use to edit options, see the “Editing Values” section on page 4-3.

Table 4-1 Network Setup Menu Options

Option

Description

To Change

 

 

 

IPv4 Setup

In the IPv4 Setup submenu, you can do the following:

Scroll to IPv4 Setup and press

 

• Enable or disable the phone to use the IP address that

Select.

 

is assign by the DHCP server.

 

 

• Manually set the IP Address, Subnet Mask, Default

 

 

Routers, DNS Server, and Alternate TFTP servers.

 

 

For more information on the IPv4 address fields, refer to

 

 

Table 4-2.

 

 

 

 

Host Name

Unique host name that the DHCP server assigned to the

Display only—Cannot configure.

 

phone.

 

 

 

 

Domain Name

Name of the Domain Name System (DNS) domain in

1. Set the DHCP Enabled option to

 

which the phone resides.

No.

 

 

2. Scroll to the Domain Name

 

 

option, press the Edit softkey,

 

 

and then enter a new domain

 

 

name.

 

 

3. Press the Apply softkey, then

 

 

press Save.

 

 

 

Operational VLAN ID

Auxiliary Virtual Local Area Network (VLAN)

Display only—Cannot configure.

 

configured on a Cisco Catalyst switch in which the phone

The phone obtains its Operational

 

is a member.

VLAN ID via Cisco Discovery

 

 

 

If the phone has not received an auxiliary VLAN, this

Protocol (CDP) from the switch to

 

option indicates the Administrative VLAN.

which the phone is attached. To

 

If neither the auxiliary VLAN nor the Administrative

assign a VLAN ID manually, use the

 

Admin VLAN ID option.

 

VLAN are configured, this option defaults to a VLAN ID

 

of 4095.

 

 

 

 

Admin. VLAN ID

Auxiliary VLAN in which the phone is a member.

1. Scroll to the Admin. VLAN ID

 

Used only if the phone does not receive an auxiliary

option, press the Edit softkey,

 

and then enter a new Admin

 

VLAN from the switch; otherwise it is ignored.

 

VLAN setting.

 

 

 

 

2. Press the Apply softkey, then

 

 

press Save.

 

 

 

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

4-4

OL-19025-01

 

 

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Americas Headquarters Text Part Number OL-19025-01Page Page Page N T E N T S Footstand Configuring Features, Templates, Services, and Users Troubleshooting and Maintenance Network and Access Port Pinouts C-2 OL-19025-01 Organization OverviewAudience Chapter DescriptionRelated Documentation Cisco Unified IP Phone 6900 SeriesConvention Description Document ConventionsCisco Product Security Overview Boldface fontItalic screen font An Overview of the Cisco Unified IP Phone Understanding the Cisco Unified IP Phone 6921, 6941, Buttons 2shows the main components of the Cisco Unified IP Phone OL-19025-01 OL-19025-01 3shows the main components of the Cisco Unified IP Phone OL-19025-01 Networking Protocol Purpose Usage Notes Dynamic Host Configuration Protocol chapterWhat Networking Protocols are Used? Communications Manager System GuideRelated Topics Cisco Unified Communications ManagerSystem Guide Feature Overview Related Topic Configuring Telephony FeaturesProviding Users with Feature Information Feature Description Access section onOL-19025-01 Purpose For More Information Communications Manager Administration Guide Unified Communications Manager AdministrationChapter in the Cisco Unified Communications Manager Communications Manager AdministrationTask Purpose For More Information Installing Cisco Unified IP Phones User Guide for Cisco Unified Communications Manager Network Setup IPv4 SetupRefer to Cisco Unified IP Phone 6921, 6941, User Guide Administration and System Guides Terminology DifferencesA P T E R Related Topic Providing Power to the Cisco Unified IP Phone Understanding the Phone Startup Process, Network Setup Menu,Power Type Guidelines Power GuidelinesPower Outage Understanding Phone Configuration Files Obtaining Additional Information about PowerPurpose Related Topics Resolving Startup Problems,Understanding the Phone Startup Process Adding Phones to the Cisco UnifiedRequesting the Configuration File Adding Phones with Auto-Registration Requires MAC Method Address?Adding Phones with Auto-Registration and Taps Determining the MAC Address for a Cisco Unified IP Phone Adding Phones with BATBefore You Begin Network RequirementsNetwork and Access Ports, Handset, Speakerphone, Headset, Cisco Unified Communications Manager ConfigurationNetwork and Access Ports Headset HandsetSpeakerphone Audio Quality See the Headset section on page 3-3for supported Installing the Cisco Unified IP PhoneSee the Network and Access Ports section on See the Adding Phones to the Cisco UnifiedCisco Unified IP Phone 6921 and 6941 Cable Connections Cisco Unified IP Phone 6961 Cable Connections Reducing Power Consumption on the Phone FootstandCisco Unified IP Phone 6921 Cisco Higher Viewing Angle Lower Viewing Angle Mounting the Phone to the WallVerifying the Phone Startup Process Configuring Startup Network Settings Hold Mute SpeakerOL-19025-01 Configuration Menus on the Cisco Unified IP Phone PhoneSelect Admin Settings Displaying a Configuration MenuProcedure Unlocking and Locking Options Editing ValuesSelect Network Setup MenuOption Description To Change PC Vlan IPv4 Setup Menu Options Related Topics OL-19025-01 Configuring Features, Templates, Services, and Users Feature Description Configuration Reference Administration Guide, Directory Features and Services Guide, Cisco CallFeatures and Services Guide, Call Forward Maximum Hop Count service parameterCisco Unified Communications Codes and Forced Authorization Codes Communications Features and ServicesCommunications Manager Features Extension Mobility chapter in the CiscoPoint Configuration chapter in the Cisco Speed Dials, Features and Services GuideButton Template for Personal Address Book or Cisco Communications Manager Administration Guide, Hunt GroupManager Feature and Services Guide Refer to Cisco Unified Communications Features and Services Guide, MaliciousAdministration Guide, Message Waiting Manager System Guide, Cisco UnifiedFeatures and Services Guide Barge Unified IP Phone 6921, 6941, and 6961 UserFeatures and Services Guide, Quality Administration Guide, Phone ButtonTemplate Configuration chapter Report Tool chapterPort Configuration chapter Administration Guide, Time PeriodAdministration Guide, Cisco Voice-Mail System Guide, Time-of-Day RoutingJoin and Direct Transfer Policy Configuring Corporate and Personal DirectoriesConfiguring Corporate Directories Configuring Personal Directory Modifying Phone Button TemplatesClick Save Configuring Softkey Templates Supported as a DNDSetting Up Services Giving Users Access to the User Options Web Pages Managing the User Options Web PagesClick Save Selected/Changes Click Add SelectedEnter the appropriate search criteria and click Find Specifying Options that Appear on the User Options Web Pages Configuring the Phone to Support Call Waiting Customizing and Modifying Configuration Files Customizing the Cisco Unified IP PhoneCreating Custom Phone Rings DistinctiveRingList File Format RequirementsPCM File Requirements for Custom Ring Types Configuring the Idle DisplayConfiguring a Custom Phone Ring Automatically Disabling the Cisco Unified IP Phone Backlight Field Description OL-19025-01 Model Information Screen Model Information Screen, Status Menu,Select Status Messages Status MenuStatus Messages Screen Message Description Possible Explanation and Action Network Setup Menu section on Menu section on page 4-4for detailsSetup Menu section on page 4-4for details on Network Statistics Screen Select Status Network Statistics Call Statistics Screen Select Call Statistics Voice Quality MetricsOL-19025-01 Monitoring the Cisco Unified IP Phone Remotely Accessing the Web Page for a Phone Http//IPaddressChoose Device Phone Disabling and Enabling Web Page AccessDevice Information Network Setup Cisco Unified IP PhoneDescription Description Network Statistics VlanDevice Logs Streaming Statistics Configuring Settings on the Cisco Unified IP Phone chapter Troubleshooting and Maintenance Resolving Startup ProblemsTroubleshooting and Maintenance Resolving Startup Problems Identifying Error Messages Verifying DNS Settings Choose Tools Control Center Feature ServicesSymptom Cisco Unified IP Phone Unable to Obtain IP Address Verifying the Physical Connection Cisco Unified IP Phone Resets UnexpectedlyVerifying Dhcp Settings Identifying Intermittent Network OutagesVerifying that the Phones Have Not Been Intentionally Reset Checking Static IP Address SettingsVerifying the Voice Vlan Configuration Eliminating DNS or Other Connectivity ErrorsSummary Explanation General Troubleshooting TipsChecking Power Connection Halfduxcollisionexceedthreshold Operation Performing Explanation Resetting or Restoring the Cisco Unified IP PhonePerforming a Basic Reset Performing a Factory Reset Monitoring the Voice Quality of CallsMetric Change Condition Where to Go for More Troubleshooting InformationTroubleshooting Tips Cleaning the Cisco Unified IP Phone OL-19025-01 Providing Information to Users Via a Website How Users Access a Voice Messaging System How Users Configure Personal Directory Entries Installing the SynchronizerConfiguring the Synchronizer Supporting International Users Support for International Call LoggingOL-19025-01 Physical and Operating Environment Specifications Specification Value or RangeNetwork Port Connector Cable SpecificationsNetwork and Access Port Pinouts Access Port ConnectorPin Number Function OL-19025-01 Basic Phone Administration Steps Example User Information for these ProceduresAdding a User to Cisco Unified Communications Manager Click Perform Full Sync Now Adding a User From an External Ldap DirectoryChoose System Ldap Ldap Directory Example johndoeConfiguring the Phone Proceed to the section Configuring the Phone, page D-4OL-19025-01 OL-19025-01 Choose User Management End User Click Device AssociationsPerforming Final End User Configuration Steps Installing the Wall Mount Kit for Installing the Bracket Figure E-2 Mounting the Wall Bracket Figure E-3 Attaching the Phone Bracket Figure E-4 Preparing the Handset Hook Figure E-5 Attaching the Cables Figure E-6 Attaching the Phone to the Wall Bracket OL-19025-01 Cisco Unified IP Phone Non-Lockable Wall Mount ADA Non-Lockable Wall Mount Kit for 6900 SeriesComponents Package includes these itemsInstall Non-Lockable Wall Mount Kit for Phone Before You BeginFigure F-4 Mount the Wall Bracket Figure F-5 Attach Phone Bracket Go to in Installing the Bracket, page E-2 Remove Phone from Non-Lockable Wall MountBefore You Begin Figure F-7Figure F-8 D E IN-2 IN-3 IN-4 Tftp Server IN-6 IN-7 IN-8
Related manuals
Manual 10 pages 39.29 Kb
Top Page Image Contents