Appendix D Basic Phone Administration Steps
Configuring the Phone
Example: 26640 (John Doe’s internal company telephone number)
Step 3 Click Save.
Step 4 Proceed to the section Configuring the Phone, page D-4.
Configuring the Phone
To identify the user’s phone model and protocol, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager administration, choose Device > Phone >. Step 2 Click Add New.
Step 3 Select the user’s phone model from the Phone Type
On the Phone Configuration window, you can use the default values for most of the fields.
To configure the required fields and some key additional fields, follow these steps:
Procedure
Step 1 For the required fields, possible values, some of which are based on the example of user johndoe, can be configured as follows:
a.In the Device Information pane of this window:
–MAC
Example: 00127F576611 (MAC address on john doe’s phone)
–
–Device
Note Device Pools are defined on the Device Pool Configuration window of Cisco Unified Communications Server Administration (System > Device Pool).
–Phone Button
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
|
|
| |
|
|