AT&T 9370 user manual Connect the telephone line cord

Page 8

9370_to make pdf_1ATT 6/12/00 2:06 PM Page 6

INSTALLATION

Modular					Standard
telephone					electrical outlet
jack

3Connect the telephone line cord.

If you are wall mounting the phone, use the

short line cord and press the excess cord	4 Connect the
into the groove on the bottom of the base.	power cord.

5Mount the base on the wall. (WALL MOUNTING ONLY) Hold the base so the mounting knobs on the standard wall jack will fit into the holes on the bottom of the base. Slide the base down onto the knobs until it locks into place.

6Charge the handset battery.

Place the handset face up or face down in the base.

Charge the battery at least 12 hours the first time. After the first charge, the battery will quick-charge in only six hours.

7Check for dial tone.

After the batteries are charged, lift the handset and press P; you should hear a dial tone.

8Set up Telephone features. See page 8.

9Set up Caller ID features. See page 9.

10Set up Answering System features. See pages 10–14.

11Set up Caller Specific Outgoing Announcements and Talking Caller ID.

See pages 15–18.

6

Image 8

Contents Revised 6/12/00 Advanced American Telephones. All rights reserved Contents Page About Home and Local Area Codes Before YOU BeginAbout Caller ID with Call Waiting Installation Before You InstallTable/Desk and Wall Installation Install the handset batteryConnect the telephone line cord Softkeys Feature SetupMessage Window Display for Feature Setup Telephone Feature Setup Dial ModeHandset Ringer Off / Battery Save Handset RingerCaller ID Feature Setup Program Home and Local Area CodesCaller ID with Call Waiting Call List OptionsAnswering System Feature Setup Audible Message Alert Select Your AnnouncementRing Select / Toll Saver Change Priority Calling Code Change Remote Access CodePriority Call Signal Review Feature Settings Record Your Announcement from the BaseDelete an Announcement Set the ClockCaller Specific Outgoing Announcement Feature Setup Talking Caller ID Feature SetupAnnouncements Outgoing Local Review ADD Enter Number Done Menu Call ID DIR Directory MEM ANS SYS Delete Done Telephone Operation Mute RedialTemporary Tone Record a Phone Conversation HoldIntercom Changing Channels Headset JackSpeaker Base Ringer Volume AT the BasePage/Intercom Handset LocatorTelephone MEMORY/DIRECTORY Store a Number in MemoryReplace a Stored Number Store a Pause in a Memory NumberStore a Name with a Memory Number Store a Number and Name from Call History View Memory NumbersDelete Memory Numbers Edit Memory NumbersDial a Memory Number from the Base Priority Ring NumbersDial a Memory Number from the Handset Audible Indicators Answering System OperationAbout Mailboxes Announcement Play/SilentAnswering Calls Call Screening/InterceptAnnouncement Bypass Record a MemoListen To, Save & Delete Messages Function ButtonMessage Window Display CL ↔ AOCall Screening Connect with the Answering SystemFrom the Cordless Handset From a Touch Tone PhoneRemote Access Commands Function CommandEnd remote access call Audible Signals Voice Help MenuMemory Match Call WaitingIncoming Call History Display Dial Caller ID OperationReview Call History Delete Call Records from Call History Delete a Specific Call RecordCaller ID Display Messages Delete All Call RecordsOperating Range Batteries Battery LifeCharge the Handset Battery Pack Batteries Replace the Handset Battery Pack Case of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and baseIf the caller’s name or phone number is not displayed If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If you have difficulty hearing messages If speakerphone conversation sounds distortedIf messages are incomplete If CL appears in the Message Window If your outgoing announcement isn’t clearIndex Index Remote Commands Answering SystemRemote Command Press