9370_to make pdf_1ATT 6/12/00 2:07 PM Page 39
CALLER ID OPERATION
Review Call History
Review information in the call history at any time.
1Press <or >, or press Uand select
CALL-ID.
2The screen displays the number of calls in the call history and how many, if any, are new.
3Use <or >to scroll through the call history. The screen displays the name (if your service provides this), number, date, and time of the call simultaneously, beginning with the most recent call.
4When you reach the end of the call history, the screen displays END OF LIST. Press <or >to continue reviewing the call history.
5To exit the review, you can press either softkey or wait 30 seconds.
Display Dial
MENU
99 CALLS/25 NEW TO SCROLL
3175550123 DOE JOHN
END OF LIST
NOTE: To use the Display Dial feature, you must follow the directions to “Program Home and Local Area Codes” (see page 9 in the FEATURE SETUP section of this manual).
Press on the handset as you review calls in call history. The screen displays the number being called and the phone dials the number. If the screen displays an error indicator (for example, Er), you cannot dial any displayed digits.
If the call came from within your home area code, the screen displays the phone number without the area code (seven digits). When you press , the phone dials the number as displayed. You must program your home area code for this to work.
If the call came from one of the local area codes you programmed, the screen displays ten digits (three digits of area code plus seven digits of
phone number). When you press , the phone dials the number as displayed, without inserting a “1” before the area code.
39