ClearSounds CS-CLA7BT manual

release the Multi-Function button to confirm the requested action.

	Device	Status	Action
Function	Phone	CLA7BT	Hands Free Profile
Power ON	--	OFF	Press and Hold
			the Multi-Function
			Button until the
			Neckloop is powered
			ON. A set a 4 tones
			plays (low to high)
			and LED flashes 2
			times (0.1 Sec on,
			0.5 Sec off)
Pairing/	--	OFF	Press and Extend
Bonding			Hold the Multi-
			Function Button
			until the LED is
			steadily ON. The
			neckloop can then
			be discovered by
			another Bluetooth
			Device for 2 minutes.
Power OFF	--	ON (idle)	Press and Extend
			Hold the Multi-
			Function Button
			until the neckloop
			is powered OFF. A
			set of 4 tones plays
			(high to low) and the
			LED is off.
Make a	ON and the	ON (idle)	Press and Release
Voice Dial	phone must		the Multi-function,
Call	support		speak the name of
	voice dialing		the number you want
	from hands		dialed, the phone
	free device		will dial the number.

13 – ENGLISH