ClearSounds CS-CLA7BT manual With the CLA7BT and phone in close proximity

With the CLA7BT and phone in close proximity

1With your CLA7BT off, press and hold the Multi Function Button on the left side of your neckloop for more than 3 seconds.

After the LED indicator lights up steadily, the neckloop is in pairing mode.

2Perform a device discovery from your phone (for the detail on device discovery for your phone, refer to your owner’s manual). When the scan is complete, the phone displays the devices found

3Select BT 107 from the list of devices discovered and confirm per the requirements of your phone.

4When prompted by the phone, enter the passkey 0000. Your phone will confirm that bonding occurred and the CLA7BT will confirm it paired successfully with 10 rapid flashes.

5The phone information is now stored in the CLA7BT memory.

NOTE: Make sure the neckloop and phone you are using are no more than 10m/33 feet apart, so they are within operable range.

If the neckloop is not successfully paired within 2 minutes, it will automatically leave pairing mode. If you still want pairing, you will need to repeat the steps listed above.

9 – ENGLISH