ClearSounds CS-CLA7BT manual Important Facts on Charging the CLA7BT

IMPORTANT FACTS ON CHARGING THE CLA7BT

FIRST TIME USE:

Before using your CLA7BT for the first time, you need to charge its self-contained LI-Ion battery for 24 hours.

RECHARGING:

When you hear 5 rapid beeps through your hearing aid or repeated at 20 second intervals and the LED indicator turns red you will need to recharge the battery.

After the battery is fully charged, the LED indicator will turn off. It takes approximately 1 to 1.5 hours to fully charge the battery. Do not charge for more than 24 hours.

Over extended periods of time, the battery will gradually wear down and require longer charging times. This is normal. The more you talk on the phone using your CLA7BT the less standby time your battery has.

HOW TO CHARGE:

1Using AC Power Supply - Connect the 3.5mm end of the USB cable into the charging port of the CLA7BT, and then connect the other end into the USB jack of the base charger. Plug the base charger

6 – ENGLISH