Lucent Technologies 585-310-575 manual Software Install Menu

Installation

Figure 2-1. Software Install Menu

3.Insert the tape labeled Enhanced-List Application into the tape drive.

4.Select:

>Tape drive

The system displays the message:

Insert a tape into the Tape Drive. Type [go] when ready

or [q] to quit: (default: go)

5. Press ENTER to go ahead with the install. The system displays the message:

Installation in progress. Do not remove the tape.

The following packages are available:

1 ELA Enhanced List Application Package

Select package(s) you wish to process (or ‘all’ to process all packages). (default: all) [?, ??, q].

NOTE:

If you receive a device open failure message, the tape was inserted after you selected Tape Drive or the system did not see the tape. In that case, complete step a through step d below.

a.Enter q

The system displays the Software Install menu (Figure 2-1).

b.Remove the tape from the tape drive.

c.Re-insert the tape into the tape drive.

d.Repeat step 4 and step 5.

10Issue 1 July 1997