Lucent Technologies 585-310-575 manual Defining an ELA Class of Service, Ch cos COSnumber

Administering AUDIX for ELA

6.Press (F3) ENTER to save the information in the system database.

The cursor returns to the command line, and the system displays the message Command Successfully Completed.

7.Continue with the next procedure or enter exit to leave AUDIX Administration.

Defining an ELA Class of Service

The following task contains instructions for the fields that directly relate to ELA. The other fields should be administered to support all capabilities that you anticipate using, that is, maximum call answer length, announcement set, etc. See your INTUITY Messaging Solutions Release 4 Administration book for explanations of the other fields on these screens, and their implications.

NOTE:

ELA can take up to 12 hours to show the changes you make to subscriber information in INTUITY AUDIX.

Before you begin the following procedure, ensure that you have an unused Class of Service that you can define for ELA. We recommend that you use a COS that is between 2 and 11. (Customers often use COS 1 as their default Class of Service).

To administer a COS for ELA:

1.Starting from the main menu (Figure 3-1on page 3-14), select:

>AUDIX Administration

2.At the enter command: prompt, enter either:

Full Command Version	Short Command Version
change cos COS_number	ch cos COS_number

where COS_number is the unique Class of Service you would like to use for ELA. For example, enter ch cos 10.

The system displays the Class of Service screen (Figure 3-2).

16Issue 1 July 1997