Lucent Technologies 585-310-575 manual Administering Audix for ELA

Administering AUDIX for ELA

Figure 3-6. TCP/IP Administration Window; Administering TCP/IP for Enhanced-List Application (ELA)

2.Enter the AUDIX server name in the UNIX Machine Name: field. This name should be listed on the Installation Information worksheet, or you can obtain this name from your PC/LAN administrator. This is a case-sensitive field, so capital letters must be typed as capitals, and lowercase letters as lowercase.

NOTE:

This name must be the same as the local machine name specified on the Local Machine Administration screen. It cannot start with a number and cannot contain any embedded spaces, for example, denver 1 is not allowed, but denver_1 is allowed.

3.Enter the IP (Internet Protocol) address in the IP Address: field and press TAB . This is the Lucent INTUITY system’s address. Your PC/LAN system administrator should have this information.

If your system is not connected to a LAN, enter any number in the format w.x.y.z, where each letter is a number, 0 to 255.

NOTE:

Write this IP address down, as you will need it when you administer the ELA trusted server later in this section.

4.Enter the subnet mask in the Subnet Mask: field.

The subnet mask is used to determine which bytes of the IP address specify the network and host addresses. This is an optional field. If there is no entry for this field on your worksheet, leave the field blank. The system will automatically use a default.

NOTE:

The default value may conflict with your LAN configuration. Check with your PC/LAN system administrator to ensure compatibility.

24Issue 1 July 1997