NEC SP5008A user manual CDR Setting, CDR mode CDR Server address CDR Server port

3.1.7 CDR Setting

CDR mode

CDR Server address

CDR Server port

Select the CDR mode for Enable or Disable. If you Enable this feature, please specify the CDR Server address and port number at the CDR server address and port’s text box, then you can get Call Detail Data form CDR Server.

If you Enable the CDR mode, please specify the IP address of CDR Sever for data storage. Specify the CDR Server port number,

The default port number is 514.

1.Press the “Apply” button (at the bottom) after you finish to save changes.

2.Press the “Reboot” button to apply the changes.

NOTE: To receive the SYSLOG CDR, you need to have a syslog server to collect the CDR from MICRONET SP5008A / SP5018A / SP5058A. The following is a tool you can be used for testing purpose which can be downloaded from http://tftpd32.jounin.net/. You need to enable syslog server from settings before you can use it.

32