8375 Falcon UG Issue 2 [2] 12/9/07 15:30 Page 7
BT Falcon UG – Issue 2 – Edition 02 – 12.09.07 – 8375
Getting started | 7 |
|
|
4.Power
Plug the power lead into the socket labelled DC underneath the telephone. Plug the other end into the mains socket and switch on.
Power lead
If your network supports power over Ethernet (PoE) your BT Falcon can be powered from a powered Ethernet switch via the Ethernet cable. In this case the mains power adapter is not required.
5. Connecting to the network
Ensure your router has power and an internet connection. Connect the Ethernet cable into the socket labelled LAN underneath the telephone and plug the other end into the Ethernet port of the router or Ethernet switch as appropriate.
Ethernet cable from Broadband Router or Ethernet switch
You can connect a network device to the Ethernet port, labelled PC, of your BT Falcon
If you experience any problems, please call the Helpline on 0800 169 1146 or go to www.bt.com/business/broadbandvoice