
To recharge the battery outside of the pager:
1.Insert the transformer’s round connector into the back of the charger.
Transformer
Battery
Compartment
Transformer
Round Connector
2.Insert the transformer’s
3.Place the 3.6 V NiMH battery in the charger’s battery compart- ment by aligning the positive (+) and negative
4.Press the battery firmly into place. The lit red LED indicator light means that the battery is charging.
ÄA flashing red LED indicator means the battery is not making a good contact. Ensure the pager is properly seated in the charger.
5.When the green LED indicator becomes lit, the battery is fully charged. Remove the battery from the front of the charger.
TIP Leaving the battery in the charger after the LED turns green keeps the battery fully charged until removed. Keep your spare battery fully charged by leaving it in your
16 PageWriter 2000X User’s Guide
To replace the battery:
1.Match the positive (+) marking on the fresh battery with the two (2) contact side of the pager’s battery compartment and the negative
2.Insert the battery into the battery compartment at an angle toward the outer edge of the pager, then press the battery down into place.
ÄEnsure the lift tab is underneath, not on top of, the battery. The tab is designed to help lift the battery out of the compartment during battery removal.
3.Fold the protruding lift tab down on top of the battery, then slide the battery door back into place. An audible click can be heard when the door is securely closed.
The Infrared Port
The PageWriter 2000X
When a data transfer is in process between the pager and a PC, the green and red LED indicator lights on the PageWriter 2000X pager will flash intermittently.
How Your PageWriter 2000X Pager Works 17