5.Press 
up or down to set the hour.
6.Press 
to move to the minute in the Start Time field.
7.Press 
up or down to set the minute.
8.Press 
to move to the AM/PM field in the Start Time field. Press 
up or down to select AM or PM.
9.Repeat Steps 4 through 6 for the End Time.
10.Select 
to save the settings.
Message alerts will not be played during the time you set as Quiet Time.
Maintaining Inboxes and Applications
Maintenance features such as Cleanup and Delete Applications enable you to remove unwanted messages or applications from your pager. To schedule the cleanup feature, see “To assign a cleanup schedule to an inbox:” on page 42.
To clean up all inboxes:
1.Select 
from the menu wheel.
2.Select Cleanup.
3.Select the containers to be cleaned:
All ↵ Deletes all read messages stored in inboxes that have no alarms set.
Inboxes ↵ Deletes all read messages stored in inboxes.
ÄMessages deleted in the cleanup process are not stored in the Trashcan. They are permanently deleted and cannot be recov- ered.
4.Select 
to delete the messages and return to the Custom- ize screen.
To delete applications:
1.Select 
from the menu wheel.
2.Select Delete Applications.
3.Press 
up or down to highlight the application requiring
deletion, then select 
.
4.Select 
at the confirmation screen to delete the applica- tion and return to the Customize screen.
52 PageWriter 2000X User’s Guide
Setting the Alarm Clock
Set an audible or vibrating alert at up to three preset times. These alarm clock alerts have no messages attached to them.
To set an alarm:
1.From the menu wheel, select 
. The Alarm Clock screen has three tabs that enable you to set three different alarms.
2.Press 
left or right, or 
to select Alarm 1, Alarm 2, or Alarm 3.
3.Press 
down to move to the On/Off switch. Press 
left or right to select On or Off.
ÄA bell icon (
) on an alarm’s tab indicates that the alarm is on. A bell icon also displays on the status line of the menu wheel screen when an alarm is set.
4.Press 
to move to the Frequency field. Press 
left or right to select how often you want the alarm to go off. Your options are Once, Weekends, Weekdays, or Every day.
If you didn’t select a frequency of Once, skip to Step 6.
5.If you selected Once, a Date field becomes active just below the
Frequency field. Press 
to move to the Date field. Press 
left or right to change the date (one day at a time).
6.Press 
to move to the hour in the Time field.
7.Press 
up or down to change the hour.
8.Press 
to move to the minute in the Time field.
9.Press 
up or down to change the minute.
10.Press 
to move to AM/PM in the Time field. 11.Press 
up or down to select AM or PM.
12.Press 
to move to the Alert field. Press 
left or right to select the type of alarm you want (audible, vibrate, etc.).
13.To set other alarm times, repeat for the second and third alarm tabs.
14.Select 
to save the settings and return to the menu wheel.
Customize 53