█PARTS CHECKLIST
Check the contents of the box - The A16000 should contain:
1. | Phone base | 1 | 2 | 3 |
|
|
| ||
2. | Cordless Handset |
|
|
|
3. | Batteries |
|
|
|
4. | Phone Line Cords | 4 | 5 | 6 |
5. | AC Adapter |
|
|
|
6. | Carrying Clip |
|
|
|
7. | User Manual | 7 |
|
|
|
|
|
|
█PHONE INSTALLATION
The phone should be located in an area where it is easy to see the visual display and lighted ringer. Choose an area near a phone wall jack (RJ11C) and power outlet. To avoid potential interference, the phone should not be located near electronic equipment, such as personal computers, television or microwave ovens.
Begin by removing the clear plastic Caller ID protective tab from the handset and the base. This film tab is only for display and to protect your Caller ID displays during shipping.
Connecting Lines
1.Connect one end of the 6 ft phone cord to the line jack on the back of the base and connect the other end to a modular phone jack.
2.Plug the AC power adapter into the jack on the back of the base, then
plug the AC adapter into a standard | to AC outlet / to phone jack |
electrical outlet or surge protector. |
|
Note: The adapter is required for the phone to work.