To use the cordless handset headset jack:
As soon as you plug your headset into the headset jack on the cordless handset, it will be activated.
To use the base audio neckloop jack:
1.Plug your neckloop, headphones, headset or other accessory into the base Audio jack.
2.If you want to speak into the handset, lift the handset, listen for dial tone and dial the number. Speak into the handset and adjust your volume. To end the call, replace the handset to the base.
3.If you want to speak into the speakerphone, press the Speaker key, listen for dial tone and dial the number. Speak into speakerphone (the conversation will be heard through both your audio equipment and over the speakerphone) and adjust your volume. To end the call, press the Speaker key again on the base.
To use the base headset jack:
1.Plug your neckloop, headphones, headset or other accessory into the base Headset jack.
2.Press the Headset key, listen for dial tone and dial the number. Talk into the headset microphone and adjust your volume (see below for amplification instructions). To end the call, press the Headset key.
█Using the Base Amplification Function
Your ClearSounds® A1600 is equipped with a specialized amplification function designed to adjust to your needs. Flexibility in the management of amplification and tone is important when trying to achieve listening clarity. Be sure to try all levels of amplification and tone to find the best level for your hearing needs.
The Volume and Tone control on the front panel of the phone allow you to adjust the volume of the headset jack and neckloop jack during a call. During a call, adjust the controls to fit the levels to your hearing requirements.