ClearSounds A1600 manual Auto On Hook

Your ClearSounds® A1600 comes from the factory preset for Caller ID on Call Waiting ON. To change this setting:

1.Press under the word Menu on the screen to display the main menu list.

2.Press to scroll to Set Phone and then press under the word Select.

3.Press to scroll to Call Waiting and then pressunder the word Select.

4.Press or to choose between ON/OFF to activate/ deactivate the call waiting function and then press under the word Select.

Note: If you subscribe to Call Waiting on Caller ID, you will receive Caller ID information (if available) on Call Waiting calls (see page 41).

If you subscribe to Call Waiting service from your local phone provider, during a phone call you will hear a beep to indicate another call is waiting on the line.

1.To connect to the waiting call, press the Call Waiting key, and your original call is put on hold. The display will show F.

2.To switch between the two calls, press the Call Waiting key.

█Auto On Hook

Your ClearSounds® A1600 comes from the factory preset for Auto On Hook set to OFF. This feature can automatically disconnect the line after 15-30 minutes if the phone is left off the hook. This will restore your line to be able to receive another call even if the call is not disconnected. To change this setting:

1.Press under the word Menu on the screen to display the main menu list.

2.Press to scroll to Set Phone and then press under the word Select.

3.Press or to scroll to AUTO ON HOOK and then press under the word Select.

4.Press or to select On or Off and then press under the word Save.

31 – ENGLISH