ClearSounds A1600 manual Visual and Vibrating Ringer

1.Press under the word Menu on the screen to display the main menu list.

2.Press up or down to scroll to HS Settings and then press under the word Select.

3.Press down to scroll to Ring Setup and then press under the word Select.

4.Press under the word Select to select INT Ring or press

down to select EXT Ring, and then press under the word Select.

5.Press up or down to select the ring tone from Melody 1-Melody 10. When adjusting the Melody, the handset plays the selected melody.

6.Press under the word Select.

7.To adjust the volume level, select Ring Volume and then press under the word Select. You can select and adjust the volume from Volume 1-Volume 5, or Off. When adjusting the Volume, the handset plays the selected loudness.

8.Press under the word Select.

Note: If you set the volume to “Off”, when a call comes in, only the New Call information appears on the LCD and the phone will not ring.

Visual and Vibrating Ringer

You can activate the visual ringer and vibrating handset function. A bright LED light will flash and the handset will vibrate when the phone rings. To turn this feature on/off:

In standby mode, press and hold until the icon appears to activate and press and hold again to deactivate.

57 – ENGLISH