Character Map
To enter a specific alphanumeric character, press the relevant key one or more times for the required character according to the following table: once for the first character, twice for the second and so on.
Clarification:
•If you want to shift the case between upper and lower, between entering letters, press the * key.
•When entering the same letter twice or a different letter with same key, wait for a few seconds for the cursor to move automatically and then select the next letter.
█Adding Phonebook Entries
1.Enter a phone number while in standby mode and then press 
under the word Save.
2.The number will appear on the display. Press 
under the word Save.
3.“Name:” will appear on the display. Enter the name you
want to use and then press 
under the word Save.
4.The display will show the list of ring tones to select from.
Press 
or 
to select the desired ring tone. Press 
under the word Select.
5. Repeat if necessary.
Note: If you make a mistake while entering a name or a number, press 
under the word Clear to correct it. Each time you press this key, the last digit is deleted.