HANDSET SET UP
Reminder: Press
under the word Back on the screen from any menu to return to the previous screen. To return to the main screen, press
. Otherwise, after 30 seconds, the phone will automatically return to the main screen from any menu if no key is pressed.
█Registering the Handset
The supplied handset is already registered to the base unit, and you can register up to 4 additional handsets to the base.
1.Before registering an additional handset to the base, you should press and hold the page key , which is located on the main base until you hear a loud tone and then release it.
2.Press 
under the word Menu on the screen of the handset you are registering to display the main menu list.
3.Press up 
or down 
to scroll to Registration and
then press 
under the word Select.
4.Press up
or down
to scroll through the base list and select one of the bases and then press
under the word Select. The handset will search for the requested base.
5.If the base is found, and the handset is successfully registered, you will be prompted to enter the PIN code (the default PIN is 0000). Upon validation of the PIN, the Registration tone will sound and the base assigns a number to the handset. If the PIN entered is invalid, a warning tone will sound and the handset will return to the previous registration state.
6.If the base is not found, the handset will behave according to the Out of Range description found on page 52.
Note: Remove Handset 1 from the main base while registering additional handsets.