TCD440_445AL(E).book Page 21 Monday, May 24, 2004 1:17 PM
Useful Telephone Settings
desired item, then press {>}.
5Press {v} repeatedly to select the desired setting from “RING TYPE 1” to “RING TYPE 20”, then press {>}.
6Press {ih}.
Note:
L If you select one of the melody ringer types, the ringer will continue to sound for several seconds if the caller hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call.
Tone options
You can turn the following tones and alarms on or off.
“KEY TONE”: Tones heard when keys are pressed. Includes confirmation tones and error tones.
“CALL WAITING”: Tones heard when an outside call is received while on an intercom call.
“RANGE ALARM”: An alarm heard when you move out of range of a base unit during a conversation.
“BATTERY LOW”: An alarm heard when the batteries need to be charged.
1Press {j}.
2Press {v} repeatedly to display “SETTING HS”, then press {>}.
3Press {v} repeatedly to display “TONE OPT”, then press {>}.
4Press {v} repeatedly to display the desired item, then press {>}.
5Press {v} repeatedly to select “ON” or “OFF”, then press {>}.
6Press {ih}.
Display options
Selecting the standby mode display
“CLOCK”: The time and date will be
displayed. Set the time and date beforehand (page 11).
“OFF”: Turns this feature off.
“BS NO”: The base unit number will be displayed.
“HS NO”: The handset number will be displayed.
1Press {j}.
2Press {v} repeatedly to display “SETTING HS”, then press {>}.
3Press {v} repeatedly to display “DISPLAY OPT”, then press {>}.
4Press {v} repeatedly to display
“STANDBY MODE”, then press {>}.
5Press {v} repeatedly to select the desired setting, then press {>}.
6Press {ih}.
Note:
L If you subscribe to a Caller ID service, the display will show the number of new calls even if “CLOCK” has been selected (page 17).
L If “BS NO” is selected, the base unit number will be displayed.
Example:
L If “HS NO” is selected, the handset number will be displayed.
Example:
Selecting the talk mode display
“TALK TIME”: The length of the current call will be displayed.
“PHONE NO”: The phone number will be displayed.
1Press {j}.
2Press {v} repeatedly to display “SETTING HS”, then press {>}.
3Press {v} repeatedly to display “DISPLAY OPT”, then press {>}.
21