Useful Information
Programmable settings
Problem | Cause/solution |
I cannot program items. | LProgramming is not possible while either the |
| base unit or another handset is being used. Try |
| again later. |
|
|
I cannot set the alarm. | LIn order to set the alarm, you must first set the |
| date and time (page 14). |
| LThe handset has lost the communication with |
| the base unit. Move closer to the base unit, and |
| try again. |
|
|
While programming, the | LA call is being received. Answer the call and |
handset starts to ring. | start again after hanging up. |
|
|
Battery recharge |
|
Problem | Cause/solution |
I fully charged the battery, | LClean the charge contacts and charge again |
but 7continues to flash, | (page 11). |
or 8is displayed. | LThe battery may need to be replaced with a new |
| one (page 10). |
|
|
The handset display is | LConfirm that the battery is properly installed. |
blank. | LFully charge the battery (page 10). |
|
|
While charging, the charge | LThe battery is empty. The charge indicator does |
indicator does not light and | not light in order to concentrate on charging. |
“Charge for 7h” is | After about 5 minutes, the charge indicator lights |
displayed. | and “Charging” is displayed. |
|
|
42For assistance, please visit http://www.panasonic.com/help