Panasonic KX-TG4034, KXTG4031B, KX-TG4053, KX-TG4052 Error messages, Display message Cause/solution

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Base no power	L The handset has lost communication with the
or	base unit. Move closer to the base unit and try
	again.
No link. Re-connect	L Unplug the base unit’s AC adaptor to reset the
	unit. Reconnect the adaptor and try again.
base AC adaptor.	L The handset’s registration may have been
	canceled. Re-register the handset (page 28).
Busy	L The called unit is in use.
	L Other units are in use and the system is busy.
	Try again later.
	L The handset you are using is too far from the
	base unit. Move closer and try again.
Call phone company for	L You have not stored the voice mail access
your access #	number. Store the number (page 38).
Check tel line	L The supplied telephone line cord has not been
	connected yet or not connected properly.
	Check the connections (page 10).
Error!!	L Recording was too short. Try again.
Invalid	L There is no handset registered to the base
	unit matching the handset number you
	entered.
	L The handset is not registered to the base unit.
	Register the handset (page 28).
Requires subscription	L You must subscribe to a Caller ID service.
to Caller ID.	Once you receive caller information after
	subscribing to a Caller ID service, this
	message will not be displayed.
Use rechargeable	L A wrong type of battery such as Alkaline or
battery.	Manganese was inserted. Use only the
	rechargeable Ni-MH batteries noted on page
	5, 8.

For assistance, please visit http://www.panasonic.com/help 43