Listening to Messages
Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 14).
Using the Base Unit Base Unit
You can see the total number of recorded messages on the base unit display. If the NEW MESSAGE indicator flashes on the base unit, new messages have been recorded.
•If the Message Alert is turned on (p. 28), the Ringer/Message Alert indicator on the handset will flash slowly when new messages have been recorded and the handset is not in use.
To play back messages
Press [MESSAGE/SLOW TALK].
•The unit announces the number of new messages and only new messages are played back.
•When you have no new messages, the unit announces “No new messages. All message playback” and plays back all messages.
•When you have no messages, the unit announces “No messages”.
NEW MESSAGE Indicator
[MESSAGE/
SLOW TALK]
•During playback, the display shows the message number.
•At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than 3 minutes.
•If a call is received during playback, the unit rings and playback stops. To answer the call, press [SP-PHONE]. For playback, start again from the beginning after hanging up.
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Charge the battery for 6 hours before initial use
GHz Digital Cordless Answering System
Model No. KX-TG2386 Pulse-or-tone dialing capability
Accessories included
Attach your purchase receipt here
Copyright
For assistance, please call 1-800-211-PANA7262
Battery Charge
For Best Performance
Base Unit Location/Noise
Contents
Contents
Greeting Check Button p
Location of Controls
Base unit
Greeting REC Record
OFF Button
Location of Controls
Handset
Handset soft keys
Base unit display
Handset navigator key
Connections
Installation
Display prompt Battery strength
Installation Installing the Battery in the Handset
Battery strength
To replace the battery
Recharge
Installation
Battery information
Battery replacement
Programming Guidelines Handset
Programmable Settings
How to select a function item from the menu
Initial setting
Main menu
Programmable Settings Function Menu Table Handset
Programmable Settings Date and Time Handset
For Caller ID service users p
To confirm the date and time, repeat steps 1 and 2 above
Dialing Mode Handset
Programmable Settings Display Language Handset
Auto Talk Handset
Programmable Settings Line Mode Handset
Or B
Programmable Settings Ringer Volume
Handset ringer volume Handset
Ringer setting
Ringer Tone
Programmable Settings
Base unit ringer volume Base Unit
To turn the ringer on, press Volume or
Setting the base unit ringer tone by using the Handset
Select the desired ringer tone by pressing d or B
To 3 Bell ringer patterns To 7 Melody patterns
Handset Talking Keypad feature Handset
Programmable Settings LCD Contrast Handset
Pre-Dial number
Base Unit Talking Keypad feature Handset
Scroll to Name List by pressing d or B
Programmable Settings Name Announcement Handset
Greeting Message Base Unit
Programmable Settings Hearing Aid Mode Handset
Scroll to Hearing Aid Mode by pressing
Preparing the Answering System
Sample greeting message
To adjust the speaker volume, press Volume or during
Preparing the Answering System
To record a greeting message
To review the greeting
To erase the greeting
Pre-recorded greeting
Number of Rings Handset
Recording time
Number of rings
Recording Mode Handset
Recording mode
Toll saver
Scroll to Message alert by pressing d or
Preparing the Answering System Message Alert Handset
Hands-free Digital Duplex Speakerphone
Using the Handset Handset
Making Calls
To have a hands-free phone conversation
To redial the last number dialed
To adjust the receiver/speaker volume during a conversation
Making Calls
To dial after confirming the entered number Pre-dial
Press HOLD/INTERCOM again
To redial using the redial list Memory Redial
To put a call on hold
Press Redial
Backlit LCD display/Lighted handset keypad
Using the Base Unit Base Unit
To turn this feature on, press the soft key VE
Voice Enhancer Technology
To return to the call, press SP-PHONE
To adjust the speaker volume during a conversation
Press SP-PHONE, then press Redial
Press HOLD/CONF during a conversation
To transfer the call to another person, see
Answering Calls
Talk into the MIC To hang up, press SP-PHONE
OFF s Auto Talk
Caller ID Service
How Caller ID information is displayed and announced
Display Meaning
Talk Caller ID
Caller ID Service Talking Caller ID
Handset Talking Caller ID feature Handset
To turn Talking Caller ID on or off
Scroll to Set base unit by pressing d or
Using the Caller List
Caller ID Service
Base unit Talking Caller ID feature Handset
Press OFF to exit the list
Using the Caller List Viewing the Caller List Handset
Press the soft key Rcvd calls, d , or B
To enter the Caller List
If a caller calls more than once
Using the Caller List
Calling Back from the Caller List
What , means
Save
To call the edited number, press C or s
Scroll to Caller ID edit by pressing d
Using the Caller List Caller ID Number Auto Edit Handset
To turn Caller ID Number Auto Edit on or off
Caller ID edit
Press the soft key Rcvd calls, d, or B
Scroll to the desired caller by pressing d or
Press the soft key Select
Using the Caller List Erasing Caller Information Handset
To erase a specific caller
To erase all entries
Storing Names and Numbers Handset
Phone Book
For example, to enter Tom
If you make a mistake when entering a name or number
Phone Book
Selecting characters to enter names
Press d repeatedly until the desired name is displayed
Phone Book Dialing from the Phone Book Handset
Press the soft key Phone book Press the soft key Search
To search for a name by initial
Keys Index
Index table
Press the soft key Call
Phone Book Chain Dial Handset
While you are on a call Press Menu
Search for the desired item by pressing d or
Phone Book Editing an Item in the Phone Book Handset
Erasing an Item in the Phone Book Handset
Jane Walke r
Right will be shown
One-Touch Dialer
If the registration number selected
Manually is occupied, the display on
One-Touch Dialer Dialing a Stored Number Handset
Press HOLD/INTERCOM
Locator/Intercom
One-Touch Dialer Erasing Handset
Making Intercom Calls
Answering Intercom Calls
Locator/Intercom
Press SP-PHONE or LOCATOR/INTERCOM to answer
Transferring a Call
Quick call transfer
Transferring a Call
During a call, press HOLD/ Intercom
Conference Calls
Call Share
To join a conversation Call Share
Muting Your Conversation
Special Features
For Call Waiting Service Users
Temporary Tone Dialing
Scroll to Set flash time by pressing d
Special Features Using the Pause Key
Selecting the flash time Handset
Set flash time
Incoming call
Special Features Incoming Call Tone Handset Base Unit
Handset incoming call tone Handset
Base unit incoming call tone Handset
Press and hold LOCATOR/INTERCOM until a beep sounds
Special Features Key Tone Handset
Re-registering the Handset Handset & Base Unit
Scroll to Key tone by pressing d or B
Setting the Unit to Answer Calls Base Unit
Automatic Answering Operation
Press Answer on to turn on the Answering System
To turn the incoming call monitoring feature off
Listening to Messages
To play back messages
Press MESSAGE/SLOW Talk
Press Menu Press the soft key Select at Message play
To end remote operation, press OFF
Voice menu
To call back the displayed number
Listening to Messages
Within 10 seconds, press Erase again
Erasing Messages
Erasing a specific message
Erasing all messages
When finished, press Memo or Stop
Recording a Memo Message
Summary of remote operation
Scroll to Remote code by pressing d or
Enter a 2-digit remote code
To confirm the remote code, repeat steps 1 to
Talk after the long beep
Remote Operation from a Touch Tone Phone Voice Menu
Direct commands
To turn on the Answering System
Skipping the greeting
Wall Mounting
To attach the shoulder rest attachment
Belt Clip
Shoulder Rest Attachment
To attach the belt clip To remove the belt clip
Optional Headset
Connecting an optional headset
Menu item Command Selection items
Direct Commands
During programming
Direct Commands
Display message Cause & Remedy
If the Following Appear on Your Display
Troubleshooting
Problem Cause & Remedy
Telephone System
Troubleshooting
Troubleshooting
Talk time on the handset has been shortened
Answering System
Problem Cause & Remedy
General
But Recharge battery is
Important Safety Instructions
FCC and Other Information
Important Safety Instructions
FCC and Other Information
FCC RF Exposure Warning
FCC and Other Information
Index
Phone book
Index
San Gabriel Industrial Park
Limited Warranty Coverage
Mail-In Service
Limited Warranty Limits And Exclusions
Customer Services Directory
For your future reference
Energy Star
For product service
When you ship the product
PQQX14302YA F0504-2065D