Panasonic KX-TG2386 FCC and Other Information, Important Safety Instructions

Page 84

Important Safety Instructions

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1.Use only the battery(ies) specified.

2.Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions.

3.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

4.Exercise care in handling batteries in order not to short the battery to conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns.

5.Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is easily accessible.

FCC and Other Information

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ-----.

If requested, this number must be provided to the telephone company.

Registration No

(found on the bottom of the unit)

Ringer Equivalence No. (REN)

0.1B

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

84

Image 84
Contents Charge the battery for 6 hours before initial use GHz Digital Cordless Answering SystemModel No. KX-TG2386 Pulse-or-tone dialing capability Accessories included Attach your purchase receipt hereCopyright Battery Charge For Best PerformanceBase Unit Location/Noise For assistance, please call 1-800-211-PANA7262Contents Contents Location of Controls Base unitGreeting REC Record Greeting Check Button pLocation of Controls HandsetHandset soft keys OFF ButtonHandset navigator key Base unit displayInstallation ConnectionsInstallation Installing the Battery in the Handset Battery strengthTo replace the battery Display prompt Battery strengthInstallation Battery informationBattery replacement RechargeProgrammable Settings How to select a function item from the menuInitial setting Programming Guidelines HandsetProgrammable Settings Function Menu Table Handset Main menuProgrammable Settings Date and Time Handset For Caller ID service users pTo confirm the date and time, repeat steps 1 and 2 above Programmable Settings Display Language Handset Dialing Mode HandsetProgrammable Settings Line Mode Handset Auto Talk HandsetProgrammable Settings Ringer Volume Handset ringer volume HandsetRinger setting Or BProgrammable Settings Base unit ringer volume Base UnitTo turn the ringer on, press Volume or Ringer ToneSetting the base unit ringer tone by using the Handset Select the desired ringer tone by pressing d or BTo 3 Bell ringer patterns To 7 Melody patterns Programmable Settings LCD Contrast Handset Handset Talking Keypad feature HandsetBase Unit Talking Keypad feature Handset Pre-Dial numberProgrammable Settings Name Announcement Handset Scroll to Name List by pressing d or BProgrammable Settings Hearing Aid Mode Handset Scroll to Hearing Aid Mode by pressingPreparing the Answering System Greeting Message Base UnitTo adjust the speaker volume, press Volume or during Preparing the Answering SystemTo record a greeting message Sample greeting messageTo review the greeting To erase the greetingPre-recorded greeting Number of Rings Handset Recording timeNumber of rings Recording Mode Handset Recording modeToll saver Preparing the Answering System Message Alert Handset Scroll to Message alert by pressing d orUsing the Handset Handset Making CallsTo have a hands-free phone conversation Hands-free Digital Duplex SpeakerphoneTo adjust the receiver/speaker volume during a conversation Making CallsTo dial after confirming the entered number Pre-dial To redial the last number dialedTo redial using the redial list Memory Redial To put a call on holdPress Redial Press HOLD/INTERCOM againUsing the Base Unit Base Unit To turn this feature on, press the soft key VEVoice Enhancer Technology Backlit LCD display/Lighted handset keypadTo adjust the speaker volume during a conversation Press SP-PHONE, then press RedialPress HOLD/CONF during a conversation To return to the call, press SP-PHONEAnswering Calls Talk into the MIC To hang up, press SP-PHONEOFF s Auto Talk To transfer the call to another person, seeCaller ID Service How Caller ID information is displayed and announcedDisplay Meaning Caller ID Service Talking Caller ID Handset Talking Caller ID feature HandsetTo turn Talking Caller ID on or off Talk Caller IDUsing the Caller List Caller ID ServiceBase unit Talking Caller ID feature Handset Scroll to Set base unit by pressing d orUsing the Caller List Viewing the Caller List Handset Press the soft key Rcvd calls, d , or BTo enter the Caller List Press OFF to exit the listUsing the Caller List Calling Back from the Caller ListWhat , means If a caller calls more than onceTo call the edited number, press C or s SaveUsing the Caller List Caller ID Number Auto Edit Handset To turn Caller ID Number Auto Edit on or offCaller ID edit Scroll to Caller ID edit by pressing dPress the soft key Rcvd calls, d, or B Scroll to the desired caller by pressing d orPress the soft key Select Using the Caller List Erasing Caller Information Handset To erase a specific callerTo erase all entries Phone Book Storing Names and Numbers HandsetIf you make a mistake when entering a name or number Phone BookSelecting characters to enter names For example, to enter TomPhone Book Dialing from the Phone Book Handset Press the soft key Phone book Press the soft key SearchTo search for a name by initial Press d repeatedly until the desired name is displayedIndex table Keys IndexPhone Book Chain Dial Handset While you are on a call Press MenuSearch for the desired item by pressing d or Press the soft key CallPhone Book Editing an Item in the Phone Book Handset Erasing an Item in the Phone Book HandsetJane Walke r One-Touch Dialer If the registration number selectedManually is occupied, the display on Right will be shownOne-Touch Dialer Dialing a Stored Number Handset Locator/Intercom One-Touch Dialer Erasing HandsetMaking Intercom Calls Press HOLD/INTERCOMLocator/Intercom Answering Intercom CallsTransferring a Call Press SP-PHONE or LOCATOR/INTERCOM to answerTransferring a Call Quick call transferConference Calls Call ShareTo join a conversation Call Share During a call, press HOLD/ IntercomSpecial Features For Call Waiting Service UsersTemporary Tone Dialing Muting Your ConversationSpecial Features Using the Pause Key Selecting the flash time HandsetSet flash time Scroll to Set flash time by pressing dSpecial Features Incoming Call Tone Handset Base Unit Handset incoming call tone HandsetBase unit incoming call tone Handset Incoming callSpecial Features Key Tone Handset Re-registering the Handset Handset & Base UnitScroll to Key tone by pressing d or B Press and hold LOCATOR/INTERCOM until a beep soundsSetting the Unit to Answer Calls Base Unit Automatic Answering OperationPress Answer on to turn on the Answering System To turn the incoming call monitoring feature off Listening to Messages To play back messagesPress MESSAGE/SLOW Talk Press Menu Press the soft key Select at Message play To end remote operation, press OFFVoice menu Listening to Messages To call back the displayed numberErasing Messages Erasing a specific messageErasing all messages Within 10 seconds, press Erase againWhen finished, press Memo or Stop Recording a Memo MessageSummary of remote operation Scroll to Remote code by pressing d or Enter a 2-digit remote codeTo confirm the remote code, repeat steps 1 to Remote Operation from a Touch Tone Phone Voice Menu Talk after the long beepDirect commands To turn on the Answering SystemSkipping the greeting Wall Mounting Belt Clip Shoulder Rest AttachmentTo attach the belt clip To remove the belt clip To attach the shoulder rest attachmentConnecting an optional headset Optional HeadsetDirect Commands Menu item Command Selection itemsDirect Commands During programmingIf the Following Appear on Your Display Display message Cause & RemedyTroubleshooting Problem Cause & RemedyTelephone System Troubleshooting Troubleshooting Talk time on the handset has been shortened Problem Cause & Remedy Answering SystemBut Recharge battery is GeneralImportant Safety Instructions Important Safety Instructions FCC and Other InformationFCC and Other Information FCC and Other Information FCC RF Exposure WarningIndex Index Phone bookLimited Warranty Coverage Mail-In ServiceLimited Warranty Limits And Exclusions San Gabriel Industrial ParkCustomer Services Directory Energy Star For your future referenceFor product service When you ship the productPQQX14302YA F0504-2065D