Panasonic KX-TG2386 Making Calls, To dial after confirming the entered number Pre-dial

Making Calls

To dial after confirming the entered number (Pre-dial)

1Enter a phone number.

•The handset announces each button you press, including [1] to [0], [*] (“Star”), [#] (“Pound”), [FLASH/CALL WAIT] (“Flash”) and the soft key (Pause).

•The announcement is heard at the speaker volume (see below). To increase or decrease volume, press [B] or [d].

•If you misdial, press the soft key (Clear). Enter the correct number.

•If a pause is required when dialing, press the soft key (Pause) where needed (p. 58).

•To cancel, press [OFF].

3334444

KClear PauseL

2Press [C] or [s].

3To hang up, press [OFF] or place the handset on the base unit.

•If the Handset Talking Keypad is turned off (p. 20), the handset will not announce the buttons you press.

The handset will not make announcements, when:

•the Handset Talking Keypad is turned off

•the Answering System is in use

•the handset has lost communication with the base unit

•the base unit is announcing

•the base unit is making an outside call.

To adjust the receiver/speaker volume during a conversation

There are 6 volume levels for the receiver and the speaker.

To increase volume, press [B].	Ex. Level 6
To decrease volume, press [d].
	Volume
• The number of steps indicates the volume level.	Low	High
• The display shows the current volume setting.	K(VE)	MuteL

•If you try to increase/decrease volume when it is at the maximum/minimum level, the handset will beep 3 times.

•If you change the receiver volume to level 1 or 6, the receiver volume will return to level 2 or 5

—the next time you make or answer a call,

—when you press [C] to switch to the receiver during a hands-free conversation using the speakerphone, or

—when you unplug the optional headset to switch to the receiver (p. 73).

•3 levels (High, Medium and Low) are available while using the headset.

To redial the last number dialed

Press [C] or [s], then press [REDIAL].

30