Preparation
Panasonic
Operation | Operating |
| time |
In continuous use | 17 hours max. |
In continuous | 180 hours |
standby mode | max. |
Note:
L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).
L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.
L The battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for at least 7 hours.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Setting up the unit before use
Display language
1{ih} i {j/OK}
2Press {^} or {V} to select
“Handset Setup”. i {>}
3Press {^} or {V} to select
“Display Setup”. i {>}
4Press {^} or {V} to select
“Select Language”. i {>}
5Press {^} or {V} to select the desired language. i {>} i
{ih}
Note:
L If you select a language you cannot read: {ih} i {j/OK} i {^} 3 times i {>} i {V} 2 times i {>} 2 times i {^}/{V}: Select the desired language. i {>} i
{ih}
Date and time
1{j/OK}
2Press {^} or {V} to select
“Handset Setup”. i {>}
3Proceed with the operation for your model.
■
Press {^} or {V} to select
“Set Date & Time”. i {>}
■
“Time Settings”. i {>} i
Press {^} or {V} to select
“Set Date & Time”. i {>}
|
|
| Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333 | 13 |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|