Making/Answering Calls
Making calls
1Lift the handset and dial the phone number.
R To correct a digit, press MClearN.
2Press M
N.
3When you finish talking, press MOFFN or place the handset on the base unit or charger.
Using the speakerphone
1Dial the phone number and press MZN.
2 When you finish talking, press MOFFN.
Note:
RTo switch back to the receiver, press MZN/ M
N.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).
1MEN REDIAL
2MbN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1MEN REDIAL
2MbN: Select the desired phone number. a MEraseN
3MbN: “Yes” a MSelectN a MOFFN
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 19).
Example: If you need to dial the line access number “9” when making outside calls with a PBX:
19 a MDN (Pause)
2Dial the phone number. a M
N
Note:
RA 3.5 second pause is inserted each time MDN (Pause) is pressed.
Answering calls
1Lift the handset and press M
N or MZN when the unit rings.
2When you finish talking, press MOFFN or place the handset on the base unit or charger.
Any key answer: You can answer the call by pressing any dial key.
Auto talk: You can answer calls simply by lifting the handset (page 24).
Temporary handset ringer off: You can turn the ringer off temporarily by pressing M
N.
Adjusting the ringer volume
Handset
Press MDN or MCN repeatedly to select the desired volume while ringing.
Base unit
Press MjN or MkN repeatedly to select the desired volume.
RTo turn the ringer off, press and hold MkN until the unit beeps.
Useful features during a call
Hold
1Press MMenuN during an outside call.
2 MbN: “Hold” a MSelectN
3 To release hold, press M
N.
14For assistance, please visit http://www.panasonic.com/help