Useful Information
Problem
I cannot display the wallpaper.
I cannot register a handset to a base unit.
Cause/solution
RWallpaper is displayed in the standby mode only when you select “Digital(Small)” or “Off” for the clock setting. Change the clock setting (page 24).
RThe maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 33).
Battery recharge
Problem
The handset beeps and/or flashes.
I fully charged the batteries, but
– still flashes,
– is displayed, or
–the operating time seems to be shorter.
Cause/solution
RBattery charge is low. Fully charge the batteries (page 10).
RClean the battery ends (, ) and the charge contacts with a dry cloth and charge again.
RIt is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem
is displayed.
Noise is heard, sound cuts in and out.
Cause/solution
RThe handset is too far from the base unit. Move closer.
RThe base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.
RThe handset is not registered to the base unit. Register it (page 33).
RYou are using the handset or base unit in an area with high electrical interference.
RMove closer to the base unit.
RIf you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details.
RThe wireless network is congested. When using a smartphone to talk on landline calls (page 43), sound may cut out if large amounts of data are transmitted over the wireless network, such as when streaming video, downloading or uploading large files, etc.
RThe base unit’s
RThe base unit’s
For assistance, please visit http://www.panasonic.com/help | 49 |