Programming
Changing the handset name
Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you
select “Yes” without entering any
handset name, “Handset 1” to “Handset 6” is displayed.
1MMENUN#104
2Enter the desired name (max. 10 characters; see the character table, page 22).
R If not required, go to step 3.
3MSAVEN
4MbN: Select the desired setting. a MSELECTN 2 times
5MOFFN
Call block (Caller ID subscribers only)
This feature allows the unit to reject calls when:
–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 32).
–the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 32).
When a call is received, the unit rings for a short time while the caller is being identified. If the phone number matches an entry in the call block list, the unit sends out a busy tone to the caller, and then disconnects the call.
Important:
R When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in
the caller list (page 35) with 
after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call block list.
Important:
R We recommend storing 10 digits (including an area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.
n From the caller list:
1MFN CID
2MbN: Select the entry to be blocked.
R To edit the number, press MEDITN repeatedly until the phone number is shown in the
3MSAVEN
4MbN: “Call block” a
MSELECTN
5MbN: “Yes” a MSELECTN
6Edit the phone number if necessary (24 digits max.).
7MSAVEN a MOFFN
n By entering phone numbers:
1MMENUN#217 a MADDN
2Enter the phone number (24 digits max.).
R To erase a digit, press
MCLEARN.
3MSAVEN a MOFFN
Blocking incoming calls without phone number
You can reject a call when no phone number is provided, such as a call just showing “Out of area”.
1MMENUN#240
32For assistance, please visit http://www.panasonic.com/help