JVC MX-WMD90 Playing at Random Random Play, Repeating Tracks or CDs Repeat Play, On the unit only

Page 21

If you try to program a 33rd step

“CD FULL” will appear in the main display.

If your entry is ignored

You have tried to program a track from an empty tray, or a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks). Such entries are ignored.

Playing at Random — Random Play

The tracks of all loaded CDs will play at random.

1 Load CDs.

•If the current playing source is not the CD player, press #/ 8 on the CD player (or CD 6 on the remote control), then 7 on the CD player (or 7on the remote control) before going to the next step.

2 Press PLAY MODE repeatedly until “CD RANDOM” appears in the main display.

•Each time you press the button, play mode changes as follows:

CD PROGRAMCD RANDOM

Canceled (Continuous play)

3 Press #/ 8 on the CD player (or CD 6on the remote control).

The tracks are played at random.

Random play stops when all the tracks are played once.

To skip the playing track, rotate the right jog dial clockwise or press ¢`on the remote control.

•You cannot go back to the previous tracks by rotating the right jog dial counterclockwise or pressing 41on the remote control.

To stop during play, press 7on the CD player.

• Random play also stops when you open a disc tray.

To exit from Random play mode, press PLAY MODE once or twice, before or after play, so that the unit enters another playback mode (Continuous play or Program play mode).

Repeating Tracks or CDs — Repeat Play

You can have all the CDs, the program or the individual track currently playing repeat as many times as you like.

To repeat play, press REPEAT during or before playing. Each time you press the button, Repeat play mode changes, and the REPEAT indicator changes to light as follows:

REPEAT CD ALL REPEAT 1CD

Canceled REPEAT 1 (Continuous play)

REPEAT CD ALL: Repeats all the tracks on all the CDs (continuously or at random), or all the tracks in the program.

REPEAT 1CD*: Repeats all the tracks on one CD.

REPEAT 1: Repeats one track on one CD.

* REPEAT 1CD is not used for Program play and Random play.

To cancel Repeat play, press REPEAT repeatedly until no REPEAT indicator lights on the display.

•REPEAT 1CD is also canceled when you press PLAY MODE to change the play mode.

Prohibiting Disc Ejection — Disc Lock

You can prohibit CD and MD ejection from the unit and can lock discs.

On the unit ONLY:

To prohibit disc ejection, press 0for the CD 1 tray while holding 7for the CD player with the unit set in standby mode.

“LOCKED” appears for a while, and the loaded discs (both CDs and MDs) are locked.

If you try to eject the locked discs

“LOCKED” appears to inform you that the Disc Lock is in use.

To cancel the prohibition and unlock the discs, press 0 for the CD 1 tray while holding 7 for the CD player with the unit set in standby mode.

“UNLOCKED” appears for a while, and the loaded discs (both CDs and MDs) are unlocked.

English

– 18 –

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MX-WMD90 Mises en garde, précautions et indications diverses Face For Canada/pour le CanadaIntroduction PrecautionsContents Front Panel Location of the Buttons and ControlsDisplay Window Become familiar with the buttons and controls on your unitAmplifier/tuner section Front PanelMD deck a section MD deck B sectionRemote Control Remote ControlConnecting Antennas Putting the Batteries into the Remote ControlGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo connect a cassette deck Connecting Other EquipmentTo start the display demonstration manually Output terminalEquipment Finally Press DemoBasic and Common Operations Front panel Remote controlTurning On the Power and Selecting the Sources Setting the ClockAdjusting the Volume To adjust the clock againTo use your own sound mode Creating Your Own Sound Mode Manual ModeReinforcing the Bass Sound Activating the Surround EffectListening to FM and AM Broadcasts Presetting Stations Tuning in a StationTuning in a Preset Station To change the FM reception modePlaying Back CDs Playing Back the Entire Discs Continuous Play Loading CDsBasic CD Operations To exchange CDs during playback of anotherTo check the program contents To go to another track directly using the number buttonsProgramming the Playing Order of the Tracks Program Play To go to another trackRepeating Tracks or CDs Repeat Play Playing at Random Random PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at randomPlaying Back MDs When using MD deck B When using MD deck aLoading MDs Playing Back the Entire MD Continuous PlayBasic MD Operations To change the display IndicationsWhile playing an MD, you can do the following operations Programming the Playing Order Tracks Program PlayInsert an MD Insert MDs Press #/ 8 on MD deck B or MD B 6 on the remote controlRepeating Tracks Repeat Play To prohibit disc ejection Disc LockTracks of the loaded MDs will play at random FM/AM Tape AUX Recording on MDsAbout the track marks Before You Start RecordingTo avoid erasing important recordings Recording is only possible on MD deck BRecording the External AUX Equipment AUX Recording When recording from the cassette deck, start playing a tapeTo check the remaining time Press AUX againSynchronized Recording Various Recording FunctionsMD to MD Synchronized Recording Start playing the source on the external equipmentCD to MD Synchronized Recording To confirm the recording contentsPress Start Enter On the unit only Load a CDFirst Track Recording Single Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MDOn the unit only Prepare a CD or an MD as the source sound Listening Edit RecordingRepeat to program other tracks To stop any time during editing process and startTriple Recording Prepare the source you want to record from Long RecordingEditing MDs Introducing MD Editing Functions Divide Function Press MD EditTo join the divided tracks again, see the Join function Move Function Join FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SETErase Function CANCEL, then select the correct track number againEdit MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Press Enter Start to finish the current title entry Changing the TitleYou can make a correction or change the title Make sure that the character you want to change is flashingPress MD Title Input Track title entry indication mode appears whenPress the button for the next character you want to input Press Enter to finish the current title entryYou can assign titles during play or recording PO WER Using the TimersHow Recording Timer actually works Using Recording TimerTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SETHow Daily Timer actually works Using Daily TimerVolume level will be set the previous level when Unit is turned offTimer Priority Using Sleep TimerHow Sleep Timer actually works To clean the CD MaintenanceGeneral Notes Handling CDsAdditional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic CodingMD limitations Sound Skip Guard MemorySymptom Possible Cause Action TroubleshootingMD Messages Signification SolutionSpecifications EN, FR JVC 0199KSMMDWJEM
Top Page Image Contents