JVC MX-WMD90 manual Using Recording Timer, How Recording Timer actually works

Page 49

Continued

English

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using these timers, you need to set the clock built in the unit. (See page 11.)

Using Recording Timer

With Recording Timer, you can make an MD of a radio broadcast automatically. You can set three Recording Timer separately.

•You can set Recording Timer whether the unit is turned on or off.

•To correct a mis-entry any time during the setting process, press CANCEL.

If the CANCEL button does not work, press CLOCK/ TIMER repeatedly and start from step 1 again.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, turns off the volume, and starts recording on the MD when the timer-on time comes. Then, when the timer- off time comes, the unit automatically turns off (stands by). Recording Timer works only once, but the timer settings remain stored in memory until you reset them or disconnect the AC power cord.

2 Rotate the right jog dial to set the hour of the timer- on time, then press SET.

3 Rotate the right jog dial to set the minute of the timer-on time, then press SET.

4 Rotate the right jog dial to set the hour of the timer- off time, then press SET.

5 Rotate the right jog dial to set the minute of the timer-off time, then press SET.

6 Rotate the right jog dial to select a preset station channel number, then press SET.

7 Rotate the right jog dial to select a recordable MD in deck B, then press SET.

The corresponding REC (1, 2, 3) indicator stops flashing and remains lit. The settings you have done are shown in the main display in sequence.

•You can select “MD1,” “MD2,” “MD3,” and “MD ALL.” When you select “MD ALL,” recording will be done on all loaded MDs continuously.

8 Press POWER to turn off the unit (on standby) if necessary.

1 Press CLOCK/TIMER repeatedly to select Timer Recording 1, 2 or 3 setting mode.

•Each time you press the button, the timer mode changes as follows:

 

 

 

 

DAILY on/off

Turns on/off Daily Timer.

DAILY

 

setting mode

Sets Daily Timer.

 

REC1

 

on/off

Turns on/off Recording

 

 

 

 

Timer 1.

REC1

 

setting mode

Sets Recording Timer 1.

REC2

 

on/off

Turns on/off Recording

 

 

 

 

Timer 2.

REC2

 

setting mode

Sets Recording Timer 2.

REC3

 

on/off

Turns on/off Recording

 

 

 

 

Timer 3.

REC3 setting mode

Sets Recording Timer 3.

 

 

 

 

Clock setting mode

Sets the clock (see page

 

 

 

11).

Timer/Clock setting

 

mode is canceled

 

 

 

 

 

To stop recording any time, press 7on MD deck B.

After a timer recording is complete...

Set the volume to an appropriate listening level.

•While recording volume is turned off, and will not be restored automatically.

To turn on or off Recording Timer after its setting is done

1Press CLOCK/TIMER repeatedly until “REC1,” “REC2,” or “REC3,” which you want appears in the main display.

2To turn off the Recording Timer, press CANCEL. The corresponding REC (1, 2, 3) indicator goes off from the display.

The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.

To turn on the Recording Timer, press SET.

The corresponding REC (1, 2, 3) indicator lights up on the display. The settings you have done are shown in the main display in sequence for your confirmation.

– 46 –

Page 48 Page 50
Image 49
Page 48 Page 50
Contents MX-WMD90 Mises en garde, précautions et indications diverses Face For Canada/pour le CanadaIntroduction PrecautionsContents Front Panel Location of the Buttons and ControlsDisplay Window Become familiar with the buttons and controls on your unitAmplifier/tuner section Front PanelMD deck a section MD deck B sectionRemote Control Remote ControlConnecting Antennas Putting the Batteries into the Remote ControlGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo connect a cassette deck Connecting Other EquipmentTo start the display demonstration manually Output terminalEquipment Finally Press DemoBasic and Common Operations Front panel Remote controlTurning On the Power and Selecting the Sources Setting the ClockAdjusting the Volume To adjust the clock againTo use your own sound mode Creating Your Own Sound Mode Manual ModeReinforcing the Bass Sound Activating the Surround EffectListening to FM and AM Broadcasts Presetting Stations Tuning in a StationTuning in a Preset Station To change the FM reception modePlaying Back CDs Playing Back the Entire Discs Continuous Play Loading CDsBasic CD Operations To exchange CDs during playback of anotherTo check the program contents To go to another track directly using the number buttonsProgramming the Playing Order of the Tracks Program Play To go to another trackRepeating Tracks or CDs Repeat Play Playing at Random Random PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at randomPlaying Back MDs When using MD deck B When using MD deck aLoading MDs Playing Back the Entire MD Continuous PlayTo change the display Indications Basic MD OperationsWhile playing an MD, you can do the following operations Tracks Program Play Programming the Playing OrderInsert an MD Insert MDs Press #/ 8 on MD deck B or MD B 6 on the remote controlTo prohibit disc ejection Disc Lock Repeating Tracks Repeat PlayTracks of the loaded MDs will play at random FM/AM Tape AUX Recording on MDsAbout the track marks Before You Start RecordingTo avoid erasing important recordings Recording is only possible on MD deck BRecording the External AUX Equipment AUX Recording When recording from the cassette deck, start playing a tapeTo check the remaining time Press AUX againSynchronized Recording Various Recording FunctionsMD to MD Synchronized Recording Start playing the source on the external equipmentCD to MD Synchronized Recording To confirm the recording contentsPress Start Enter On the unit only Load a CDFirst Track Recording Single Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MDOn the unit only Prepare a CD or an MD as the source sound Listening Edit RecordingRepeat to program other tracks To stop any time during editing process and startTriple Recording Prepare the source you want to record from Long RecordingEditing MDs Introducing MD Editing Functions Press MD Edit Divide FunctionTo join the divided tracks again, see the Join function Move Function Join FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SETErase Function CANCEL, then select the correct track number againEdit MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Press Enter Start to finish the current title entry Changing the TitleYou can make a correction or change the title Make sure that the character you want to change is flashingPress MD Title Input Track title entry indication mode appears whenPress the button for the next character you want to input Press Enter to finish the current title entryYou can assign titles during play or recording PO WER Using the TimersHow Recording Timer actually works Using Recording TimerTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SETHow Daily Timer actually works Using Daily TimerVolume level will be set the previous level when Unit is turned offUsing Sleep Timer Timer PriorityHow Sleep Timer actually works To clean the CD MaintenanceGeneral Notes Handling CDsAdditional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic CodingMD limitations Sound Skip Guard MemorySymptom Possible Cause Action TroubleshootingMD Messages Signification SolutionSpecifications EN, FR JVC 0199KSMMDWJEM
Top Page Image Contents