JVC MX-WMD90 manual Assigning a Title Using the Unit

Page 44

English

You can assign a name to each MD and to each track. Once a title is assigned, it is displayed for confirmation. Each title can be composed of up to 64 characters, and can be input using alphabetic characters (uppercase and lowercase), symbols and numerals.

Assigning a Title Using the Unit

In the following example, the process is explained from the very first — that is, inserting a disc. If you already start recording or playing, start from step 3.

• To stop any time during the process, press TITLE.

1 Insert an MD you want to edit into the MD B loading slot.

2 Press one of the MD number buttons (MD 1, MD 2, and MD 3) corresponding to the MD you want to assign titles.

MD deck B starts playing the MD.

If you do not have to listen to the MD while assigning titles, press 7 for MD deck B to stop playing.

3 Press TITLE.

MD deck B enters title entry mode.

Track title entry indication (mode): appears when you press TITLE while playing or recording.

Disc title entry indication (mode): appears when you press TITLE when MD deck B stops.

4 Rotate the right jog dial to change the title entry mode.

• Title entry mode changes as follows:

Disc

 

 

1st track

 

 

 

2nd track

title

 

title

 

 

 

title

Last track

 

 

 

 

 

 

3rd track

title

 

 

 

 

 

 

title

5 Press SET to enter the selected title entry mode.

Current character

Currently selected character

entry position

 

Character entry Character set section section

6 Press DISPLAY/CHARA to select the character set you want.

Each time you press the button, the character sets change as follows:

Capital letters

 

Small letters

& Symbols *

 

& Symbols *

 

Numerals

* See page 42 for available symbols.

7 Input a character.

• EX. When entering “H”

1)Rotate the right jog dial until “H” is selected.

2)Press SET.

The selected character is entered, and the character entry position moves to the next.

To move the character entry position while entering a title, rotate the left jog dial.

If you have entered an incorrect character, press CANCEL to cancel the last entry.

To enter a blank, rotate the left jog dial to the right without entering any character (or select a blank by rotating the right jog dial, then press SET).

8 Repeat steps 6 and 7 to enter other characters.

The main display can only show 4 characters at a time. If you enter the 5th character, the first character disappears, and so on.

– 41 –

Image 44
Contents MX-WMD90 Mises en garde, précautions et indications diverses For Canada/pour le Canada FacePrecautions IntroductionContents Location of the Buttons and Controls Front PanelDisplay Window Become familiar with the buttons and controls on your unitFront Panel Amplifier/tuner sectionMD deck a section MD deck B sectionRemote Control Remote ControlPutting the Batteries into the Remote Control Connecting AntennasGetting Started UnpackingConnecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckOutput terminal To start the display demonstration manuallyEquipment Finally Press DemoFront panel Remote control Basic and Common OperationsSetting the Clock Turning On the Power and Selecting the SourcesAdjusting the Volume To adjust the clock againCreating Your Own Sound Mode Manual Mode To use your own sound modeReinforcing the Bass Sound Activating the Surround EffectListening to FM and AM Broadcasts Tuning in a Station Presetting StationsTuning in a Preset Station To change the FM reception modePlaying Back CDs Loading CDs Playing Back the Entire Discs Continuous PlayBasic CD Operations To exchange CDs during playback of anotherTo go to another track directly using the number buttons To check the program contentsProgramming the Playing Order of the Tracks Program Play To go to another trackPlaying at Random Random Play Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at randomPlaying Back MDs When using MD deck a When using MD deck BLoading MDs Playing Back the Entire MD Continuous PlayWhile playing an MD, you can do the following operations Basic MD OperationsTo change the display Indications Insert an MD Programming the Playing OrderTracks Program Play Press #/ 8 on MD deck B or MD B 6 on the remote control Insert MDsTracks of the loaded MDs will play at random Repeating Tracks Repeat PlayTo prohibit disc ejection Disc Lock Recording on MDs FM/AM Tape AUXBefore You Start Recording About the track marksTo avoid erasing important recordings Recording is only possible on MD deck BWhen recording from the cassette deck, start playing a tape Recording the External AUX Equipment AUX RecordingTo check the remaining time Press AUX againVarious Recording Functions Synchronized RecordingMD to MD Synchronized Recording Start playing the source on the external equipmentTo confirm the recording contents CD to MD Synchronized RecordingPress Start Enter On the unit only Load a CDSingle Track Recording First Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MDListening Edit Recording On the unit only Prepare a CD or an MD as the source soundRepeat to program other tracks To stop any time during editing process and startTriple Recording Long Recording Prepare the source you want to record fromEditing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionPress MD Edit Join Function Move FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SETCANCEL, then select the correct track number again Erase FunctionEdit MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Changing the Title Press Enter Start to finish the current title entryYou can make a correction or change the title Make sure that the character you want to change is flashingTrack title entry indication mode appears when Press MD Title InputPress the button for the next character you want to input Press Enter to finish the current title entryYou can assign titles during play or recording Using the Timers PO WERUsing Recording Timer How Recording Timer actually worksTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SETUsing Daily Timer How Daily Timer actually worksVolume level will be set the previous level when Unit is turned offHow Sleep Timer actually works Timer PriorityUsing Sleep Timer Maintenance To clean the CDGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsTroubleshooting Symptom Possible Cause ActionSignification Solution MD MessagesSpecifications EN, FR JVC 0199KSMMDWJEM