JVC MX-WMD90 Recording the External AUX Equipment AUX Recording, To check the remaining time

Page 30

English

When using the remote control, make sure that it is ready

for MD operations.

About the MD number lamps (MD 1 to MD 3

buttons) while recording

• Pressing MD 1, MD 2, MD 3, MD A 6, or MD B 6

• It lights red during recording.

on the remote control makes the remote control ready for

• It flashes during recording pause.

MD operations.

 

Recording FM/AM Broadcasts or from the Cassette Deck – Standard Recording

You can record FM/AM broadcasts or sounds from the equipment connected to the TAPE jacks on the rear.

1 Insert a blank or recordable MD into the MD B loading slot.

2 When recording a broadcast program, press FM/ AM, then tune into a station you want.

• See “Tuning in a station” on page 14.

When recording from the cassette deck, press TAPE.

3 Press REC PAUSE on the unit (or MD REC PAUSE on the remote control).

The REC PAUSE lamp and the disc number lamps, if MDs are inserted into the corresponding slots, start flashing red.

4 Press the MD number button (MD 1 to MD 3) corresponding to the slot number where you insert the MD.

Only the selected MD number lamps continues flashing.

5 When recording from the cassette deck, start playing a tape.

• Refer to the manual supplied with the cassette deck.

6 Press #/ 8 on MD deck B (or MD B 6 on the remote control).

The REC PAUSE lamp and the disc number lamp stop flashing and remain lit, and recording starts.

To stop recording, press 7for MD deck B.

To stop recording temporarily, press REC PAUSE (or MD REC PAUSE on the remote control) again.

To resume recording, press #/ 8on MD deck B (or MD B

6on the remote control) again.

To remove the MD, press 0for MD deck B.

To check the remaining time

Press DISPLAY/CHARA while recording.

The remaining recording time of the MD appears for a while.

Recording the External (AUX) Equipment – AUX Recording

Both analog and digital recording is possible from the external equipment connected to the AUX jacks.

For digital recording: Connect;

• Between the optical digital output terminal on the other equipment and the AUX DIGITAL IN OPTICAL terminal, by using an optical digital cord (not supplied).

• Between the audio output jacks on the other equipment and the AUX jacks, by using an audio cord (not supplied). Without connecting the audio cord, you cannot listen to the source sound while recording.

1 Insert a blank or recordable MD into the MD B loading slot.

2 Press AUX once.

3 Press REC PAUSE on the unit (or MD REC PAUSE on the remote control).

The REC PAUSE lamp and the disc number lamps, if MDs are inserted into the corresponding slots, start flashing red.

4 Press AUX again.

Each time you press the button, analog or digital input is selected alternately.

ANALOG IN: Enables analog recording through the audio cord connected to the AUX jacks.

DIGITAL IN: Enables digital recording through the optical digital cord connected to the

AUX DIGITAL IN OPTICAL terminal.

A sampling rate converter built in this unit allows you to record from a digital device whose sampling frequency is 32 kHz, 44.1 kHz, or 48 kHz.

– 27 –

Image 30
Contents MX-WMD90 Mises en garde, précautions et indications diverses For Canada/pour le Canada FacePrecautions IntroductionContents Display Window Location of the Buttons and ControlsFront Panel Become familiar with the buttons and controls on your unitMD deck a section Front PanelAmplifier/tuner section MD deck B sectionRemote Control Remote ControlGetting Started Putting the Batteries into the Remote ControlConnecting Antennas UnpackingAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckEquipment Finally Output terminalTo start the display demonstration manually Press DemoFront panel Remote control Basic and Common OperationsAdjusting the Volume Setting the ClockTurning On the Power and Selecting the Sources To adjust the clock againReinforcing the Bass Sound Creating Your Own Sound Mode Manual ModeTo use your own sound mode Activating the Surround EffectListening to FM and AM Broadcasts Tuning in a Preset Station Tuning in a StationPresetting Stations To change the FM reception modePlaying Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherProgramming the Playing Order of the Tracks Program Play To go to another track directly using the number buttonsTo check the program contents To go to another trackProhibiting Disc Ejection Disc Lock Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Tracks of all loaded CDs will play at randomPlaying Back MDs Loading MDs When using MD deck aWhen using MD deck B Playing Back the Entire MD Continuous PlayBasic MD Operations To change the display IndicationsWhile playing an MD, you can do the following operations Programming the Playing Order Tracks Program PlayInsert an MD Press #/ 8 on MD deck B or MD B 6 on the remote control Insert MDsRepeating Tracks Repeat Play To prohibit disc ejection Disc LockTracks of the loaded MDs will play at random Recording on MDs FM/AM Tape AUXTo avoid erasing important recordings Before You Start RecordingAbout the track marks Recording is only possible on MD deck BTo check the remaining time When recording from the cassette deck, start playing a tapeRecording the External AUX Equipment AUX Recording Press AUX againMD to MD Synchronized Recording Various Recording FunctionsSynchronized Recording Start playing the source on the external equipmentPress Start Enter To confirm the recording contentsCD to MD Synchronized Recording On the unit only Load a CDOn the unit only Load CDs Single Track RecordingFirst Track Recording Rotate the left jog dial to select the recordable MDRepeat to program other tracks Listening Edit RecordingOn the unit only Prepare a CD or an MD as the source sound To stop any time during editing process and startTriple Recording Long Recording Prepare the source you want to record fromEditing MDs Introducing MD Editing Functions Divide Function Press MD EditTo join the divided tracks again, see the Join function To divide the joined tracks, see the Divide function Join FunctionMove Function Rotate the right jog dial until Move ? appears Press SETEdit CANCEL, then select the correct track number againErase Function MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit You can make a correction or change the title Changing the TitlePress Enter Start to finish the current title entry Make sure that the character you want to change is flashingPress the button for the next character you want to input Track title entry indication mode appears whenPress MD Title Input Press Enter to finish the current title entryYou can assign titles during play or recording Using the Timers PO WERTo turn on or off Recording Timer after its setting is done Using Recording TimerHow Recording Timer actually works To turn on the Recording Timer, press SETVolume level will be set the previous level when Using Daily TimerHow Daily Timer actually works Unit is turned offTimer Priority Using Sleep TimerHow Sleep Timer actually works General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsTroubleshooting Symptom Possible Cause ActionSignification Solution MD MessagesSpecifications EN, FR JVC 0199KSMMDWJEM