JVC MX-WMD90 manual Basic MD Operations, To change the display Indications

Page 24

English

MD playback sequence on MD deck B

When 3 MDs are loaded in MD deck B loading slots, they are played in one of the following sequences.

•When MD 1 is pressed : MD 1 ] MD 2 ]MD 3 (then stops)

•When MD 2 is pressed : MD 2 ] MD 3 ]MD 1 (then stops)

•When MD 3 is pressed : MD 3 ] MD 1 ]MD 2 (then stops) * If no MD is in the loading slot, MD deck B skips that slot.

To go to another track directly using the number buttons

Pressing the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10 , +10, +10, then 2.

Basic MD Operations

While playing an MD, you can do the following operations.

To stop playback for a moment

When using MD deck A: Press #/ 8on MD deck A (or MD A 6 on the remote control).

To resume play, press the button again.

When using MD deck B: Press #/ 8on MD deck B (or MD B 6 on the remote control).

To resume play, press the button again.

To locate a particular point in a track during play

On the unit:

Rotate the left jog dial.

•

Counterclockwise (1): Fast reverses the tracks.

•

Clockwise (`) :

Fast forwards the tracks.

On the remote control:

Press and hold 41or ¢`.

•1: Fast reverses the tracks.

•`: Fast forwards the tracks.

To go to another track

On the unit:

Rotate the right jog dial.

•Counterclockwise (4): Goes back to the beginning of the current or previous tracks.

•Clockwise (¢) : Skips to the beginning of the next tracks.

On the remote control:

Press 41or ¢`repeatedly.

•4: Goes back to the beginning of the current or previous tracks.

•¢: Skips to the beginning of the next or succeeding tracks.

To change the display Indications

Each time you press DISPLAY/CHARA, the indications in the main display changes as follows:

Before play:

For MD deck A

Track No. &

Disc Title

playing time

For MD deck B

Remaining

 

Track No. &

 

 

recording time

 

 

playing time

 

 

on the disc

 

 

 

 

 

 

 

Disc Title

 

 

 

 

 

 

During play:

Track No. &

Elapsed playing time Track Title

If a title cannot be shown at a time

The unit scrolls the title.

If there is no title

“NO TITLE” will appear when you change the display indication.

To exchange MDs during playback of another (ONLY for MD deck B)

If MDs are exchanged during playback, playback will stop after playing all newly inserted MDs.

1Press 0for MD deck B to open the disc loading slot cover.

2Replace MDs.

3Press 0for MD deck B again to close the disc loading slot cover.

When you open the MD loading slot cover to replace MDs

The slot of the currently playing appears empty. Do not put any MD in this slot. If you put an MD in this slot and close the cover, the cover automatically opens (“OCCUPIED” appears in the main display).

– 21 –

Page 23 Page 25
Image 24
Page 23 Page 25
Contents MX-WMD90 Mises en garde, précautions et indications diverses For Canada/pour le Canada FacePrecautions IntroductionContents Location of the Buttons and Controls Front PanelDisplay Window Become familiar with the buttons and controls on your unitFront Panel Amplifier/tuner sectionMD deck a section MD deck B sectionRemote Control Remote ControlPutting the Batteries into the Remote Control Connecting AntennasGetting Started UnpackingConnecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckOutput terminal To start the display demonstration manuallyEquipment Finally Press DemoFront panel Remote control Basic and Common OperationsSetting the Clock Turning On the Power and Selecting the SourcesAdjusting the Volume To adjust the clock againCreating Your Own Sound Mode Manual Mode To use your own sound modeReinforcing the Bass Sound Activating the Surround EffectListening to FM and AM Broadcasts Tuning in a Station Presetting StationsTuning in a Preset Station To change the FM reception modePlaying Back CDs Loading CDs Playing Back the Entire Discs Continuous PlayBasic CD Operations To exchange CDs during playback of anotherTo go to another track directly using the number buttons To check the program contentsProgramming the Playing Order of the Tracks Program Play To go to another trackPlaying at Random Random Play Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at randomPlaying Back MDs When using MD deck a When using MD deck BLoading MDs Playing Back the Entire MD Continuous PlayBasic MD Operations To change the display IndicationsWhile playing an MD, you can do the following operations Programming the Playing Order Tracks Program PlayInsert an MD Press #/ 8 on MD deck B or MD B 6 on the remote control Insert MDsRepeating Tracks Repeat Play To prohibit disc ejection Disc LockTracks of the loaded MDs will play at random Recording on MDs FM/AM Tape AUXBefore You Start Recording About the track marksTo avoid erasing important recordings Recording is only possible on MD deck BWhen recording from the cassette deck, start playing a tape Recording the External AUX Equipment AUX RecordingTo check the remaining time Press AUX againVarious Recording Functions Synchronized RecordingMD to MD Synchronized Recording Start playing the source on the external equipmentTo confirm the recording contents CD to MD Synchronized RecordingPress Start Enter On the unit only Load a CDSingle Track Recording First Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MDListening Edit Recording On the unit only Prepare a CD or an MD as the source soundRepeat to program other tracks To stop any time during editing process and startTriple Recording Long Recording Prepare the source you want to record fromEditing MDs Introducing MD Editing Functions Divide Function Press MD EditTo join the divided tracks again, see the Join function Join Function Move FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SETCANCEL, then select the correct track number again Erase FunctionEdit MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Changing the Title Press Enter Start to finish the current title entryYou can make a correction or change the title Make sure that the character you want to change is flashingTrack title entry indication mode appears when Press MD Title InputPress the button for the next character you want to input Press Enter to finish the current title entryYou can assign titles during play or recording Using the Timers PO WERUsing Recording Timer How Recording Timer actually worksTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SETUsing Daily Timer How Daily Timer actually worksVolume level will be set the previous level when Unit is turned offTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance To clean the CDGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsTroubleshooting Symptom Possible Cause ActionSignification Solution MD MessagesSpecifications EN, FR JVC 0199KSMMDWJEM
Top Page Image Contents